Is there a manufacturer that makes a say 2" (or close to it) cowl hood for the 86 Merc Capri?
There was one that did it but the name of them escapes me at the moment.
Is there a manufacturer that makes a say 2" (or close to it) cowl hood for the 86 Merc Capri?
There was one that did it but the name of them escapes me at the moment.
I have no experience with any of them but there are these options:
Champion makes a 3"
http://www.championhoodsandproducts....ngertbird.html
H.O. Fibertrends has a 2.5"
http://hofibertrends.com/1979-198621...ctionhood.aspx
There can't be but a couple of places actually making them, so this is probably one that Jeff has listed already, but Late Model Restoration lists one in the catalog too - http://www.latemodelrestoration.com/...Induction-Hood
Bryan
1985 LTD Police Package
Maier Racing also has a 2.5" cowl hood for the Capri. P/N 7986CC $439.95.
http://www.maierracing.com/ Click on the "Catalog" button on the left side, then "79-04 Mustang", then "Fiberglass", then "Hoods".
Hope that helps!
Justin
1985 Mustang GT 5.0 CFI/AOD (originally)
Now: 306, AFR 185s, Edelbrock Victor Jr. 302 Intake, Pro-Systems 4150HP, FTI/Ed Curtis custom cam, 170amp large case 3G Alternator, PA AOD with Silverfox SPT-MAC valve body, 3500rpm Stall, FRPP Aluminum Driveshaft, MM C/C plates, Tokico HP's, MM full length SFC's, SN95 Cobra brakes front and rear, 31 spline Fox length 8.8" with 4.10's, MM rear lowers and FRPP uppers, a few other MM suspension goodies, Jet Hot ceramic coated FRPP shorties, Pypes X-pipe, SpinTech Pro Streets and some other go fast parts.
1984 Mustang LX 5.0 4bbl/T5 (Sold)
LS swaps are the hair implants of the car world. Sure the owner is proud, but everyone else is laughing.
I'll check into the LMR one. I like the bolt on fact without the hood pins.
Thx everyone!
I have the H.O Fibertrends for my 85 Capri, very well built bolt on hood! Requires very little prep work!
David
I wish they made more hoods for capris. I wouldn't mind a 4 inch. Any body know the fitment quality of the champion 3 inch hood.
86 mercury Capri 5.0 5 speed.
I have the HO fibertrends one. Very happy with it, required very little prep work. My major disapointment was lack of the Capri hood vents in them here's a link to my write up on the solution:
http://vb.foureyedpride.com/showthread.php?t=131334
.
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
Funny, with shipping straight from HO Fibertrends, the hood is $25 more than if I bought from 50Resto. Price is $100 more, but 'free' shipping. Shipping to me from HO is $125....
I have always thought about one of these, especially after seeing Mike Crokes...
I have a Maier one on my '79 Capri. Been on there since 1993.
Thats a sweet looking capri ya got there. And if my eyes arent decieving me, the fact that you put a bubble back on it makes you way cooler in my book!
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
^^^ Sure...rub it in!
It'd look cooler like this.....
- Ed
'85 Capri RS - "1BADMERC" -'00 GT40P motor & heads, Edelbrock RPM/Holley 650, E303 cam, full length BBK ceramics,5spd/flowmaster 2-chambers/373's
5 Lug conversion, cobra discs on all four corners, 1" drop
My cowl hood thread:
http://vb.foureyedpride.com/showthread.php?t=131334
i like the look of both of them. I'll research both of them more (fitment isues, prep work, will accept factory hardware). edman and Croke...both cars look amazing BTW. I'm hoping to get close to yours one day.
Connect With Us