Here are some photos of my 86 GT convert with Weiand supercharger. It has a stock 90 5.0 short block with Crower cam and Edelbrock heads. TCI AOD, 2600 converter, 8.8 position with 3.73 gears.
Here are some photos of my 86 GT convert with Weiand supercharger. It has a stock 90 5.0 short block with Crower cam and Edelbrock heads. TCI AOD, 2600 converter, 8.8 position with 3.73 gears.
2000 Explorer engine with Edelbrock intake, Holley 600, TCI AOD, 3.73 gears, Max Mtr sport roll bar, subframe connectors, and rear control arms. /I]
Very clean. Great looking car.
It's funny- the longer I look, the more similarities I see in hose and wiring run decisions, although yours is far prettier. Nice car.
1983 Mustang G.T. No-option stripper- I like strippers.
5.0, GT40P heads, Comp Cams XE270HR-12 on 1.6 rockers, TFI spring kit, Weiand 174 blower, Holley 750 mechanical secondarys, Mishimoto radiator, Edelbrock street performer mechanical pump, BBK shortys, T-5 conversion, 8.8 rear, 3.73 gears, carbon fiber clutches, SS Machine lowers, Maximum Motorsport XL subframes, "B" springs.
2000 Explorer engine with Edelbrock intake, Holley 600, TCI AOD, 3.73 gears, Max Mtr sport roll bar, subframe connectors, and rear control arms. /I]
That car is awesome. Love the very clean looking engine bay. I have the same blower and my engine bay is cleaned up like yours, except I kept the battery up front. I have a 4" cowl hood on mine and clears the air filter by 1/2". I had to run a 6" air cleaner so I could close the hood as the 14" would hit the rear of the hood.
Bob
1967 mustang coupe -sold
1967 cougar GT - sold
1984 Mustang L 5.0L - Totaled
1984 Mustang GT 5.0L
2007 Mustang GT convertible ( wifes car)
1997 F-350 powerstroke
USMC Retired 1981-2001
Wow - as previously stated that’s a very clean car.
1979 Indy Pace Car Mustang 302 / 5spd
1982 Mustang GT T-Top 302 / 4spd
1986 SVO Mustang - 1C
I used Scottrods aluminum panels with wiring run on frame channel under them. I used an offset air cleaner base to put in the center of hood (because of the fox body engine offset). I like the air cleaner showing, kind of a "shaker". Then I discovered right before a cruise event that the blower pulley was hitting the hood. Quick fix was another 3" hole. Wish now I had bought a smaller pulley instead. I'm only making 4 pounds of boost and would like to get to 6-8.
2000 Explorer engine with Edelbrock intake, Holley 600, TCI AOD, 3.73 gears, Max Mtr sport roll bar, subframe connectors, and rear control arms. /I]
Sorry for the delay- some minor trimming on the hood, a fabricated panel to make the air cleaner seal to the hood, and a factory '83 GT hood scoop made functional. I switched to one of the cheap Autozone filter top air cleaners to give the airflow a better path to the carb.
Last edited by brianj; 05-27-2018 at 09:25 AM.
1983 Mustang G.T. No-option stripper- I like strippers.
5.0, GT40P heads, Comp Cams XE270HR-12 on 1.6 rockers, TFI spring kit, Weiand 174 blower, Holley 750 mechanical secondarys, Mishimoto radiator, Edelbrock street performer mechanical pump, BBK shortys, T-5 conversion, 8.8 rear, 3.73 gears, carbon fiber clutches, SS Machine lowers, Maximum Motorsport XL subframes, "B" springs.
It makes 7 pounds at 6000, and I have no idea on the size. I can measure it up. It came used with it, and everything worked as it sat, so I never bothered checking. I just cowboy'd it together and crossed my fingers.
1983 Mustang G.T. No-option stripper- I like strippers.
5.0, GT40P heads, Comp Cams XE270HR-12 on 1.6 rockers, TFI spring kit, Weiand 174 blower, Holley 750 mechanical secondarys, Mishimoto radiator, Edelbrock street performer mechanical pump, BBK shortys, T-5 conversion, 8.8 rear, 3.73 gears, carbon fiber clutches, SS Machine lowers, Maximum Motorsport XL subframes, "B" springs.
Well, I pulled the supercharger off and installed an RPM air gap manifold and Holley 600. I just bought an 83 scoop to finish out the hood.
The car is for sale in the classified forum.
2000 Explorer engine with Edelbrock intake, Holley 600, TCI AOD, 3.73 gears, Max Mtr sport roll bar, subframe connectors, and rear control arms. /I]
Connect With Us