Fox Chassis, what are you able to tell me about this. I'm particularly interested in the A/C info. Hopefully you can read it.
Bill
Fox Chassis, what are you able to tell me about this. I'm particularly interested in the A/C info. Hopefully you can read it.
Bill
Last edited by billkandi; 01-04-2009 at 10:20 PM. Reason: Added words
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
Here's a better size to read, the ink is faint on the actual sheet.
Bill
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
If the car had A/C it would show up on line B4. Looks like that line is blank on your build sheet. Another way to tell info about the car is to look on the buck tag - it shows it there as well.
If it is not on the build sheet, it's my money is that it's not on the buck tag either.
2007 SL55 - Capri Blue - Leather, 487/560 WHP/WTQ at 13.5PSI
I thought all along it was dealer air. I have the under dash pull handle that opens the cowl vent. Never saw that on a "real" A/C car, plus under the hood didn't look right. I wasn't sure if a blank on the build sheet meant "no got" or what. Thanks!
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
How about sharing some pics of the underhood AC (and the rest of the car while you're at it).
My 84 RS Turbo has factory air (kind of tough to see in this picture):
1979 Indy Pace Car Mustang 302 / 5spd
1982 Mustang GT T-Top 302 / 4spd
1986 SVO Mustang - 1C
I don't have any shots of the underhood yet. I just posted some shots in the "Resto Related" area of the outside. Where mine looked "off" was with the A/C hoses, not quite factory. The car is at my mother's garage at the moment as I haven't brought it over to mine from when I retired from the USAF. Moving cross country sucks. I have the room now, just no transport method. Yet.
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
I've been doing digging of late and I don't know if Foxchassis ever did a decode on my build sheet/buck tag. I've got both in albums on my profile, but they're here too.
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
VIN
1ME = Mercury vehicle manufactured in USA by Ford Motor Company
B = active belts, no airbags
P = passenger car
79 = Capri 3-door sedan (hatchback)
W = EFI turbocharged 2.3L engine
6 = VIN check digit
E = 1984 model year
F = Dearborn Assembly
615028 = 15,028th 1984 Mercury scheduled for production at Dearborn Assembly
Buck Tag
CAPRI = Capri model line
615028 = 15,028th 1984 Mercury scheduled for production at Dearborn Assembly
61D = Capri 3-dr hatchback
W = EFI turbocharged 2.3L engine
TR = T-roof
0541 = body & paint rotations #0541
9W = Dark Charcoal Metallic exterior paint color
RS = tri-color lower paint (Silver Metallic lower w/ Coral/Yellow Orange tape stripe)
DF
ST
06 = YES rear defrost
HB = heated backlite (rear defrost)
TRS = Turbo RS model/trim level
PW = power side windows (no power door locks)
MBW = manual Borg Warner transmission (5-speed T-5)
04 = vents in hood, 'bulge' hood scoop
EL
-A = Charcoal interior trim color
EI = electronic injection (EFI)
06
4
3
4 = T-roof door with power locks and/or power windows
NLR
Build Sheet
Line X
840416 1614 = build sheet printed on April 16, 1984 at 4:14 PM
Line A
Rotations Number - 4967 = trim & chassis rotations #4967
Line - F = Capri model line
VIN - P79EF615028 = [VIN decoded above]
Body Type - 61D = Capri 3-dr hatchback
Body, Tops, Roof - H = T-roof
Ext, Paint, Body - 9W = Dark Charcoal Metallic exterior paint color
Ext, Paint, Accent - 1E = Silver Metallic lower (also w/ Coral/Yellow Orange tape stripe aka 'tri-color paint')
Ext, Tutone - [blank] = no tu-tone paint
Int, Trim - PA = cloth Articulated Sport seating (P), Charcoal interior trim color (A)
Int, Deviation - [blank] = no interior trim deviation
Int, Inst Bd - A = Charcoal instrument panel color
Type of Order - 2 = Stock order
Region & District - 41 = Chicago district sales office
Special Order - [blank] = not a special order
Line B
Emission Control - [blank] = no special emissions system
Engine - W = turbocharged non-intercooled 2.3L engine
Trans - 2 = Borg Warner 'T-5' 5-speed manual overdrive transmission
Air Cond - [blank] = no factory air conditioner
Engine, Tag Number - 4G975AA = 50-state calibration (4), with or without A/C (G), turbocharged non-intercooled 2.3L engine (975), release level AA
Transmission, Part Number - E3SR AA = manual transmission (R) originally engineered for 1983 (E3) Thunderbird (S), release level AA
Seats, Type - V = Articulated Sport seating
Belts, Color - A = Charcoal seat belts
Line C
Imm Block Heater - [blank] = no immersion engine block heater
Line D
Groups, Décor, Appear - R = RS
Electrical, Wipers - W = interval windshield wipers
Electrical, Defroster - E = electric rear window defrost
Electrical, Audio, Radio - R = AM/FM stereo cassette radio
Electrical, Audio, Spkrs - Z = four speakers with premium sound system
Electrical, Lights, Light Group - V = visibility/light group
Power Aids, Deklid Release - F = remote decklid release
Power Aids, Locks - [blank] = no power door locks
Power Aids, Windows - S = power side windows
Glass, Tint - T = tinted glass
Mouldings, Rocker - [blank] = no rocker panel moulding
Road Abrasion - [blank] = no road abrasion coating
Carpet/Mats - [blank] = no floor mats
Stowage Area - D = cargo area cover
Console - C = console
Mirror, Vanity - P = passenger side vanity mirror
Mirror, Outside - A = dual mirrors
Line E
Battery - DC = heavy duty battery (54 amp-hr)
Driveline, Speed-O, E05 - [blank] = imperial speedometer
Driveline, Rear Axle, Tag Number - 269E = 3.45:1 axle ratio, Traction-Lok (limited slip) differential
Suspension, Springs, Front, Left - SAA = S front left spring code
Suspension, Springs, Front, Right - SAA = S front right spring code
Suspension, Springs, Rear, Left - GAC = X rear left spring code
Suspension, Springs, Rear, Right - GAC = X rear right spring code
Pkgs, Hndlng - X = Handling Suspension package
Line F
Wheel Area, Wheel Covers - K = TRX wheel center caps
Wheel Area, Wheels 1/2 - XX = metric (TRX) forged aluminum wheels
Tires, Size - 2205VR = P220/55VR390 tires (Michelin TRX)
Tires, Color - [blank] = black sidewalls
Tires, Spare - M = mini spare
Tires, Quantity - 4 = four full size tires
F28 - [blank] = no fingertip speed control
Front End, Steering Wheel, Type of Col - T = tilt steering wheel
Hood Scoop - L = hood scoop (vents in hood, 'bulge' hood scoop)
Frt License Plate Bracket - X = front license plate bracket
Line G
Accent Stripe, Type/Color - K1 = Coral/Yellow Orange tape stripe
VIN - 1MEBW = [VIN decoded above]
Axle Tag Decoder
Buck Tag Decoder
Door Tag Decoder
Owner Card Decoder
Transmission Tag Decoder
VIN Decoder
FEP Registries: Black Magic & Crimson Cat / Cobra / Dominator / G.T.350 / LTD LX/Police & Marquis LTS / M81 / Pace Car / Predator / Saleen / Turbo GT & Turbo RS / Twister II
Wanted (Dead or Alive): VINs, door tags, buck tags, build sheets, window stickers, owner cards, transmission tags, axle tags
Thank you! I love minutia and this fits the bill. My car didn't come with floor mats, always thought they had just disappeared over the years.
Last edited by billkandi; 08-24-2019 at 09:30 AM.
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
I thought I would post a small update to this thread. On the build sheet, it shows that the car was equipped with a power hatch release. I was never able to find the wiring harness connector in the dash that plugged into the release button. Just recently, I took apart the latch on the hatch itself, and there is no wiring to the hatch release whatsoever. The only wiring on the hatch is for the rear defrost, but there is nothing going to the release mechanism itself. So, either the build sheet is a little inaccurate, or the latch was replaced, and the wiring deleted all the way to the dash. Stranger things have happened, it’s just interesting to see that it appears that the build sheet is wrong.
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
My decoding of that 'Power Aids, Deklid Release' code "F" is incorrect. The remote decklid release was included in the Power Lock Group, which your car did not have.
Axle Tag Decoder
Buck Tag Decoder
Door Tag Decoder
Owner Card Decoder
Transmission Tag Decoder
VIN Decoder
FEP Registries: Black Magic & Crimson Cat / Cobra / Dominator / G.T.350 / LTD LX/Police & Marquis LTS / M81 / Pace Car / Predator / Saleen / Turbo GT & Turbo RS / Twister II
Wanted (Dead or Alive): VINs, door tags, buck tags, build sheets, window stickers, owner cards, transmission tags, axle tags
Just now seeing this reply, thanks for the clarification. I was more than a little thrown by the lack of the release. Actually, the first I've seen without it. Another question: thanks to Kendal, I've finally sourced and purchased a correct hood with cutout. My question is, did those hoods have the insulation on the underside?
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
Is the “bulge” hood scoop the one that faces forward or is the larger one that encloses the fake vents considered the bulge?
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
Nope, sorry, that's another mistake. You have a scoop .. the forward facing one.
Axle Tag Decoder
Buck Tag Decoder
Door Tag Decoder
Owner Card Decoder
Transmission Tag Decoder
VIN Decoder
FEP Registries: Black Magic & Crimson Cat / Cobra / Dominator / G.T.350 / LTD LX/Police & Marquis LTS / M81 / Pace Car / Predator / Saleen / Turbo GT & Turbo RS / Twister II
Wanted (Dead or Alive): VINs, door tags, buck tags, build sheets, window stickers, owner cards, transmission tags, axle tags
No sweat. I have both and finally have the correct hood with the cutout. I was mainly asking because I’ve seen the term applied to both of them.
I did think of another question though. Even though my car did not come with a power hatch release, the wiring harness still has the plug for it, tucked and taped inside the hatch. The question is, did the same thing happen to the harness behind the dash for the button? There is a plug taped back onto the harness over towards the center of the dash near the radio, but it does not fit the button for the hatch popper. I wonder if anybody happens to have a picture of what it actually looks like (the connector that is).
84 Capri RS Turbo
Vinemont, AL (formerly El Mirage, AZ)
USAF 1986-2007 (Ret)
Late answer to your question, but the bulge scoop is the one that wraps around the front vents with no actual opening or even fake opening. The forward facing hood scoop is the same as on the 1979 Cobra and the 1982 GT. Kind of a smaller version of the Boss 429 scoop if you squint just right.
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Connect With Us