Need some clarification as I've read through this several times and each tangent confuses me. This is for our '84 Turbo RS Capri.
I have the parts shown in the pics. These 17" Cobra wheels are the ones that will go on the car.
Front:
I have SN95 control arms with spindles/hubs attached which I believe are '96+. I also have spindles/hubs separate which are '94-'95. I am pretty sure I need to use the '94-'95 spindles. I will get caster/camber plates.
- Question 1a: Can/should I use the SN95 arms? Or just put the '94-'95 spindles on the stock '84 control arms with the spacers for the ball joints?
- Question 1b: Which calipers/rotors should I get?
- Question 2: Alternatively, should I keep the Fox style spindles and use an 11" rotor like Ranger/SVO/Mark VII?
Rear:
Have a complete SN95 8.8" axle assembly. This measures about 61" wide including the rotors between wheel mounting faces so I think this is from a '94-'98 not from a '99-'04.
- Question 3: Should/can use this as is? Need to pull the SN95 axles and get Fox length axles?
- Question 4: What springs and struts should I use since this is a 2.3T car (not a 5.0)?
Connect With Us