I am restoring my Fox back to factory stock.
This part has less than 2k miles on it. It has some very minor paint flakes as seen in the images. The actual Canton paint is really not a thick layer at all, in fact it’s nearly less than the thickness of a sheet of paper. These really can’t be seen all that much once the tank is installed because other engine bay items block the tank as seen in the prior images in first posting. This could be easily touched up - or just strip all the paint off to have a bare aluminum coolant bottle.
What you get:
Canton Black Aluminum overflow bottle WITH non-sensor cap. The bottle has a sight tube on the one side to see the coolant level.
Mounting hardware isn't included; reuse your own or get better hardware.
** If you have a Mustang 5.0 with the cap that has the low coolant sensor attached to it, that WILL work with this overflow too.
This mounts in the same location as the stock factory overflow bottle and the same mounting hardware can be used.
The Canton is $219.00 new from LMR. The non-sensor cap is $14.99 from LMR.
Please view all images.
$195.00 shipped, insured and with tracking to the US 48.
![]()
Connect With Us