Are these center caps available any where?
https://scontent.fdet1-2.fna.fbcdn.n...WQ&oe=63F2F7B0
Are these center caps available any where?
https://scontent.fdet1-2.fna.fbcdn.n...WQ&oe=63F2F7B0
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
The diameter of your caps will determine if you can find a replacement set. Individual cap do come up from time to time. The sizes were generally, 2.5 and 2.75 inches in diameter where the cap seats into the wheel.
Here is one option. Make not be an exact match, but an option. There are others, just have to stay on the look out for them.
https://www.ebay.com/itm/18437309344...Bk9SR5qkoq3LYQ
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
This could be an option. Will verify tomorrow when I go look at these wheels.
Any ideas on what these wheels are worth?
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
HAD
'82 GT monochromatic (red)...black cloth
HAVE
'85 GT vert two tone (white on charcoal)...white leather
'00 F350 two tone (white on silver)...gray cloth
'00 Excursion Limited two tone (white on tan)...tan leather...wifes ride
'08 Taurus Limited ice blue...tan leather...daughter ride
'08 Edge Limited white sand tri-coat metallic...tan leather...other daughters ride
That would help, 16x7 I was told.
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
I have picked up a couple spares off Ebay in the past. They come up from time to time, just be patient. Those wheels look like they are in good shape. Nice score!
67 Mustang Coupe
96 Tangerine GT
86 Saleen #179
Probably will go on the Turbo Coupe since the other 2 are 5 lug.
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
Yes, they are 16" Ended up buying them.
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
I have Rikens on my car (15") and the center caps seem to fit very loosely.
Same on these, very little effort to pull them off. Not sure on how they would stay on while driving?
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
86 Capri, 5.0, 5Spd, A9L QH/BE, 47 lb Inj PMAS 3" MAF, Single T44 Turbo, Front Mount IC, TW170,
Stock Cam, Explr Intake/TB, 1.7 Rockers, CF dual friction clutch, 3" DP, 2.5" full Exh, 3.27, 11.932 @ 115.78
84 LTD, 331-10:1, TW170/Exprl Intake, 47 lbs inj/80 mm LMAF, Full Duals, Quarterhorse, Vortech 7PSI, Lentech AOD, 5 lug Mk VII brakes/rear, Eibach Sway bars, Cobra HB (dads ride, but I fix it )
Your center caps look pretty short in depth/height. The ebay ARE ones are like 2.5" tall.
'86 GT - weekend driver
'86 Capri 5.0
'86 Turbo Coupe
'17 Mustang GT
'23 BRONCO
The 5 spoke Americans (ARE229) takes the short cap, and the mesh (I think they are 92's) takes the tall cap.
I hold mine in place with a little clear rtv.
Mike
85 GT - owned since 87
Connect With Us