So I recently upgraded my 80 spindles to the 87-93 V8 ones to get the 11" rotor upgrade. Everything installed no problem using stock 87 parts (rotors/calipers/bearings etc)

However the brake hoses I got for an 87 don't seem to fit right at all (not even close) ?

I know the 80 connection for the hard lines to hose and bracket may be in a slightly different spot but these don't even look close. The banjo bolt fitting comes off the bottom of the calipers and the brake line I have does not orient up towards the old connection at all and also does not seem long enough.

Anyone run into this before doing this type of upgrade ?

The maximum motorsports website shows a hose kit for such an upgrade but I can't really tell from the pics. So perhaps I need special longer or different hoses ? Or did I get the right calipers ? I can't see the hard line to hose connection being that much different on the 87 cars from my 80 etc.

I'm at a loss. Thanks in advance.