On my 200 six there is a pipe that comes the exhaust manifold and goes to I think the egr. But it’s broken off at the manifold.
What can I do to plug it ? It’s like I don’t have an exhaust at all.
On my 200 six there is a pipe that comes the exhaust manifold and goes to I think the egr. But it’s broken off at the manifold.
What can I do to plug it ? It’s like I don’t have an exhaust at all.
This hole on the manifold? This goes to a silencer and then the air cleaner. You can just plug this if you do not need smog equipment.
Lots of FREE F/Z info on my site.
http://myzephyrs.com
Looks like it. Mine is rusted so there’s no definition to it. What size bolt should I get ?
It looks to be one inch before the adapter. I do not know the size of the adapter.
Lots of FREE F/Z info on my site.
http://myzephyrs.com
Use a good solvent and let it soak before trying to remove the pipe bolt. If you mess up the threads you will need a new manifold or maybe weld the old hole closed.
"If you can't explain it simply, you don't understand it well enough."
Albert Einstein
1984 20th Anniversary GT350
Almost "Stock"
I believe that is a flared pipe fitting. You can find the same fitting in a plug form.
Fox Body/3rd Gen MCA Gold Card Judge
84 SVO 24K miles, 85 Mclaren Capri Vert. 84 GT Turbo Vert.
88 Mclaren Mustang Vert 20K miles, 89 Mustang LX Sport Vert,
03 Mach 1 7900 miles, 74 Mustang II, 69 Mustang, 67 Mustang, 07 GT500,
14 Mustang CS/GT, 15 F150 FTX Tuscany, 16 F250 Crewcab, 67 Tbird 47K miles
Connect With Us