Hello,
I have recently swapped an 8.8 rear end into my 85 GT, and now all there is to do is run brake lines. Since I plan on running true dual exhaust, I had to buy the rear upper brake hose bracket from the 86-95 Mustangs. I also bought the center upper rear brake hose that connects to said bracket. Now, the only thing I have to do bend a few brake lines. One that connects from the OEM location to the brake hose bracket that I bought, and two that run from the brake hose to the cylinders in the drums.
Any tips about how I should bend the lines so that they don't interfere with the dual exhaust system that I will be running?
Thanks.
Connect With Us