Have always thought my radio malfunctioned due to bad connections to speakers and antenna. Although those are indeed questionable from time to time, found the original wireharness had it's flaws too.
Installed An AFR meter, and used the same power lead because it switches of with the key.
Last couple of days the meter didn't work of only after some time driving around.
So time to recheck the wiring I added for the meter. All turned out fine. Then felt a loop in the harness heating up. If squeezing it the light of the radio dims...
I never guessed there to be an issue in the harness as it is completely unmolested.
Not a single thing done to it. Must have been there from the start.
Verstuurd vanaf mijn CPH2219 met Tapatalk
Connect With Us