Close



Results 1 to 4 of 4
  1. #1

    Default Wiper control module interchangeably

    Got a question for you wiring gurus, so my 83 has the common problem of the interval wiper control module being bad, causing the wipers to be on all the time. The previous owner fixed this by jumping a wire off the fuse panel to a toggle switch which will turn the wipers on and off but I only have one speed. Id like to finally fix this problem and I was wondering if a wiper control module off a different 79-86 Ford would work as a replacement. I found a module off an 84 escort thats about $125 cheaper than one that came specifically out of a Mustang. The connectors and module are physically the same but the part number is different. Anyone have any idea if itll work? Ive already replaced the wiper switch on the column and the fuse with no change.


    Sent from my iPhone using Tapatalk

  2. #2
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    13,871

    Default

    I can't say if the module will interchange or not. If your module is not working, then the simple fix is to disconnect it and just connect the wiper motor directly to the switch. The module literally just connects inline with the connection from the switch the motor. So you can disconnect the module and connect the wires directly. At that point you should have a two speed wiper without interval. I believe the current switch will still operate the wipers, but again only the two speeds. Not a fix for the module, but a better option than the jumper wire and toggle switch.
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Stalled RestoModification
    1984 SVO Still Waiting Restoration
    1986 GT Under going Wide Body Conversion Currently

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  3. #3
    FEP Senior Member
    Join Date
    May 2016
    Location
    Lake City Pa 16423
    Posts
    506

    Default

    I bought one like you mentioned from another model vehicle and it worked just fine. I added this feature to my build project, plug and play.

  4. #4

    Default

    I've repaired and/or added intermittent wipers to pre-87 Fox bodies by using parts from '83 to '88 Rangers. Should be able to find some of those still around.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •