I have been working away on rebuilding/modifying the Saleen style side skirts to fit the wide body. Lots of structural urethane, filler, etc. to make the fit and look decent. Haven't taken many pictures as it is not much to look at. I have had to lengthen the skirts and change the angle on the ends due to the flares. Finally have them just about ready for some primer and hopefully final sanding. I have also been tweaking the Cervini 91-93 front air dam to fit the 86 GT front bumper cover. Definitely not a bolt on and took lots of cutting and fitting to make it work. Glad the bumper cover was a wrecked/trashed unit as I would hate to cut up a good GT front cover. Hope to have some pictures of the whole car with the complete aero package installed and looking semi-decent before primer to show soon.
While waiting for urethane, filler, etc. to cure I decided to sound deaden the hatch of the car. This is 80mm sheets that should help to lessen the tin can effect of the Four Eyes without adding too much weight. I need to drop the headliner for the new material and do the under side of the roof as well as the front passenger compartment, but that will have to wait until the body work and paint is done.
Connect With Us