Carb to intake & EGR gaskets

[Kid-With-A-Ford]

Can anyone tell me what the part numbers are for the gaskets that go between the carb and EGR and EGR and intake. My '83 GT has a massive vacuum leak and is only pulling 5 mm-Hg at idle, and I'm trying to eliminate every possibility before I go pulling the intake manifold again. All I've been able to find online is this diagram for F series trucks with 351's. The P/N's I've found at O'Reilly's are: 60390, 60625, & 60616. If someone could let me know if these are correct that would be great.

[dynodon64]

Don't know the part numbers, but as for the vacuum leak you say you have, test for the leak to see where it is. Use a propane torch and just turn on the gas and move it around the base of the carb to see if that is where the leak is. The propane will cause the engine to smooth out.

[Saturn V]

See this thread.

http://vb.foureyedpride.com/showthre...nd-stack-order


Sent from my iPhone using Tapatalk

[devittjl]

I jus bought these for my 83. when compared to the old they look correct...

http://www.autozone.com/fuel-deliver...?checkfit=true

http://www.autozone.com/fuel-deliver...?checkfit=true

http://www.autozone.com/fuel-deliver.../67585_0_6635/