Where does the main engine wiring harness connect to the harness that goes to the ignition, dizzy coil etc on 85 gt? Is it right outside of firewall or inside of firewall?
Sent from my Pixel 3 using Tapatalk
Connection
Where does the main engine wiring harness connect to the harness that goes to the ignition, dizzy coil etc on 85 gt? Is it right outside of firewall or inside of firewall?
Sent from my Pixel 3 using Tapatalk
There should be an engine harness disconnect on the driver side inner fender just in front of the Master Cylinder. Here is a link to a reproduction engine harness. You can see the connectors on the left side of the picture that would connect to the main harness.
https://www.foxresto.com/1985-Mustan...-p/4785002.htm
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Thanks I appreciate it. That's the harness I was looking at getting. Several of my wires are brittle. From the main harness back I think they're good.
Sent from my Pixel 3 using Tapatalk
Posting Permissions
Reply With Quote
Connect With Us