Support bar part number

[Kid-With-A-Ford]

I don’t know if this is a suspension component so I apologize if I’m posting this in the wrong topic. Does anyone know what the part I’m pointing too is? It connects what I think is the sway bar or k member to the front bumper. The one on the passenger side appears to be damaged/bent. I’ve been looking to buy a new one but I don’t know what it’s called.

[gr79]

Ford calls it front frame stabilzer rod. The two behind it are rear frame stab rods.
Front= E3ZX-5C024-AC, rear= E3ZX-5C025AA.
Fronts connect K-member to rad support, rears connect K-member to floor pan gusset plates.
Found on convertibles and in M-5024-A Chassis Stiffening Kit.

If lucky, may find a used parts yard that has an 80's Mustang convertible.
Nothing special. Light steel tubing, flattened ends with drilled bolt holes.
May have to make or have one made. Would not be hard once tubing is found. Cut, flatten the ends, drill.
Its like steel tubing used on old backyard swing sets for bracing.