Close



Results 1 to 4 of 4
  1. #1

    Default Carb gaskets from the bottom up 1985 GT Holley replacement

    I’ve lost the images I took when I pulled the stock carb of our ‘85 GT. Can anyone identify the gaskets order from the bottom up? (Intake to EGR plate and upward.
    We’re ready to install a new Holley carb and I’m looking at two thicker black gaskets with four circular cut outs (not identical), a gray squarish gasket, one made out of N-8090 material. And the ring gasket which I believe is the top of carb to air filter.
    Appreciate any expertise on the forum.
    John
    Attached Images Attached Images   

  2. #2

    Default

    Welcome John,
    Go to HOLLEY'S web page, they have pictures of their gaskets.
    ed

  3. #3

    Default

    https://www.hotrod.com/articles/3-ye...0c-carburetor/

    might be helpful to check out this article. I sold my 85 GT a while back but went through this same thing when I first got it.

    the furthest on the right is of course for the air cleaner. Then is the gasket above the throttle plate and below the main body of the carb. The center gasket I think is a universal that hasn’t got a home. The left two are the ones I’m unsure of... I felt like my gasket looked different under the egr plate from either of these in the picture..

  4. #4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •