Close



Results 1 to 4 of 4
  1. #1
    FEP Member endub's Avatar
    Join Date
    Aug 2011
    Location
    Fayetteville AR
    Posts
    154

    Default Spindles for tubular k member swap

    What are the preferred sn95 spindles for a k member swap? Getting a package with a arms bump steer kit and cc plates. 79 Fairmont I'm wanting to change to 5 lug and use sn95 parts.
    Thanks Nolan

    Sent from my SAMSUNG-SM-G920A using Tapatalk

  2. #2
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    14,206

    Default

    Maximum Motorsports recommends the 96-04 spindles for their K member setup and 94/95 for OEM K member. All of that is due to the location of the rack and pinion unit. What aftermarket K member are you installing?
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Stalled RestoModification
    1984 SVO Still Waiting Restoration
    1986 GT Under going Wide Body Conversion Currently

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  3. #3

    Default

    I am running 94-95 spindles with my Team Z k member with 1” shorter control arms.
    With offset rack bushings and bump steer kit, fits great and keeps the stock track width.
    the later sn95 spindles will push the wheels out more.
    79 Zephyr, 4.6L 4v/4r70w swap, with team z front and rear suspension, 8.8 and upgraded brakes and coil overs. Running Holley Terminator X Max.

  4. #4
    FEP Member endub's Avatar
    Join Date
    Aug 2011
    Location
    Fayetteville AR
    Posts
    154

    Default

    I havnt bought one yet but was looking at the UPR kit that has coilovers a arms bump steer kit and c.c. plates. I'd like to stay away from 94-95 Spindles if possible just to save some expense, but will go that route if needed. I have a local wrecking yard that has a 95 I could harvest from but I have to pull and it's been so hot lately.

    Sent from my SAMSUNG-SM-G920A using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •