Hey to all FEP members.I need some help with something easy,but couldn't find the answer via the search forum tool & since I know most everything about EFI,but little about a carb,I figured you guys could likely give me the answer I need quicker & more accurately than elsewhere,since the majority of the years/models that are discussed on this site are not EFI.A friend of mine bought a 1979 Mustang with a 2.8 engine and he's trying to figure out the vacuum ports on the carb,since he bought the car in a non running state due to the lack of a carb.He's already purchased an oem Motorcraft 2150 carb for it & has already installed it,but needs to figure out where the vacuum hoses belong to the carb so that the vacuum advance hose on the distributor can be routed to the correct vacuum port on the carb.So with that being said,do any of you guys/gals have either a vacuum diagram or pictures that would visually aid in the correct routing of the hoses to the carb?? Another question would be,regardless of which year/model/engine this carb is installed on,does the same vacuum port on the carb always get used for the vacuum advance and is the same true for other brands/models of carbs too or does the ports location on the carb (orientation wise) change solely depending on which model or engine that particular carb is fitted to?? Sorry Im terrible with carb knowledge.Thats just one of the reasons why Im glad I was able to finally become a member here after years of trying.Im confident of the things I'll learn from members like the ones that will hopefully reply here.So thanks for any help you can give on this matter.WB
Connect With Us