Removing the I6 and k member from 1980 mustang, replacing with k member from a 1993 will the hardware be the same or will I need bolts from the 1993?
Removing the I6 and k member from 1980 mustang, replacing with k member from a 1993 will the hardware be the same or will I need bolts from the 1993?
The 4 bolts near the springs should be the same. The 79-81 K member uses a different bolt spacing on the rear bolts that run perpendicular to the frame rails. I think you may need the hardware from the 1993 to make it work. You will most likely have to do some modifications to your body also for all of it to work. I swapped the K member in my 79 PC many years ago, but I don't remember all the modifications it took to make it work right now. Sorry!
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Connect With Us