Close



Page 2 of 2 FirstFirst 12
Results 26 to 48 of 48
  1. #26
    FEP Member
    Join Date
    Dec 2016
    Location
    Grand Rapids, MI
    Posts
    495

    Default

    Maybe too late, but check this out.

    http://vb.foureyedpride.com/showthre...rmont+dash+pad
    '89 XR-7 5 Speed
    '95 SC 5 Speed
    '91 Crown Vic P72 351W
    '97 Thunderbird
    '85 Ford LTD Squire

  2. #27

    Default

    The 93 cobra sawblade or turbine or whatever you call those wheels look good on that thing!

    I fought my thermostat housing for a few weeks a year ago, so I feel ya!

    https://youtu.be/taL_CdUz7QM

    and it would continue

    https://youtu.be/ga96UkNQ0yE
    Last edited by Str8sixfan; 12-09-2019 at 11:57 PM.

  3. #28

    Default

    Quote Originally Posted by KevinVarnes View Post
    Maybe too late, but check this out.

    http://vb.foureyedpride.com/showthre...rmont+dash+pad
    Aghhh dam...




    Sent from my iPhone using Tapatalk

  4. #29

    Default

    Quote Originally Posted by Str8sixfan View Post
    The 93 cobra sawblade or turbine or whatever you call those wheels look good on that thing!

    I fought my thermostat housing for a few weeks a year ago, so I feel ya!
    Thanks, the wheels are original cobras so they sit a little tucked, but I will be buying 1Ē lug adapter to sit them flush when I swap out the rack n pinion to a newer fox. Plus with some newer rap wheel studs.

    The housing I have is a CVR design but man. Little pitta I tell ya.

    So far car is running smooth.


    Sent from my iPhone using Tapatalk

  5. #30

    Default

    Any night stalkers out there???

    Update:

    With the car running better and just passed the break in point of the torque converter Iím not happy with it. Jegs ďwhite boxĒ brand is knocking. I know th e problem is due to the stall itself. Well Iím putting the old on I had back in and will be pulling motor since itís easier for me. Plus now I can put the new index plate from Performance Automatic. ( I thinks thatís the prob for my embarrassing noisy starts)

    Time: 8:35pm

    Step one finish Michelada,
    Step two have a smoke
    Step one(revised) good Metallica playlist

    Then time to pull the motor. Aiming for a 2-3 hr pull. Letís see. Will update my success or failures after.

    Cheers vatos


    Sent from my iPhone using Tapatalk

  6. #31

  7. #32

    Default

    Update from last night.

    Motor pull was in effect just before 11, with taking a dinner break. Motor is just suspended right now. I had to call it as the motor plate dowel pin holes are not the right size.

    First pic just pulled the upper hose and started the drain.


    I like to work from top>>bottom especially since it was raining a Lil I wanted to avoid being wet as much as possible.

    I made the engine harness connect to the original. So one connection and a signal wire for the fuel pump relay. Ohh and the MSD cables (3) harness was left attached.

    By this point I took the driver side header off from the motor and spark plugs but left it connected to the down pipe. Passenger header I will leave on and disconnect from the bottom 2 bolts.


    The bottom was just the 4 tq bolts / starter ( which this being the second one, the solenoid bolts where backing off!!!) and motor mounts.

    At this point, wifey came back with a burrito and I took a 20 min break to fill up

    1 beer, a Eye of the Tiger playlist and back at it.

    The engine to trans I get from the top.

    And shortly passed 2 hr..


    Cheers mates!! I am omy out the door. Once I get back I will show you what I did to my 6 cyl Kmember to fit my C-6 and motor.


    Sent from my iPhone using Tapatalk

  8. #33

    Default

    Uuupppppdate:

    Motor is in, torque converter is torqued. Taking a break as I have no liquid courage.

    So I still am using the 6cyl K-member and the stock transmission bracket and location. Since I decided to run a C6 trans and I had plenty of room with the extra meet where the 6cyl motor mounts line up, I decided to put the motor 1.5Ē more forward.

    This gave me multiple benefits:
    1) no mods to the trans cross member as it is very different that newer foxís

    2) VERY EASY Access to the bell housing bolts. Like wow. All are out in 5 min no joke

    3) was able to use the stock Fairmont driveshaft with a 1310-1330 U-joint conversion for the c6 yoke. Fit perfect no mods.

    4)itís free and already installed

    Labor was a different story but a few drilled holes, grinder, a few hours and I was able to make the new motor mount holes needed. It did take multiple dry installs and pulls lost count after 10 times. But worth the effort as this car is WAS at the time a true budget car.

    Car was purchased for $750 in Redding from second owner and ran like crap. Instead of trying to deal with a single barrel carb, for the same price all I needed was shocks, wheel bearings, motor mounts (bought 3 total) and a few other random pieces.

    Until this most recent purchases of what my first post consist of. All I put in this car was the necessary. I HAD a total of $2500 including car prior to this updates. It had left me stranded once or twice and that led me to giving her some love.

    Anyways Iím already at the liquor store so with liquid courage. Iíll be back to work.

    Here are some pics:

    Driver side motor mount yess the hole is taller but needed it to be due to the motor mount. This does not affect anything but header fitment. Other vehicles such as my nova with factory BB used taller driver side mounts often.



    Passenger side:


    Notice the 3 holes. First from left is original 6cyl, my hole then the stock location for 4cyl/8cyl.

    Cheers


    Sent from my iPhone using Tapatalk

  9. #34

    Default

    Well then..

    Update:

    Since you canít say T-I-T-s on here... itís running chi-chiís!!! Thanks to all the help from my friend, liquid courage, itís running great. No starter noises, no knocking from the trans.. and before I bolted the carb down I changed some stuff



    Thatís my mess from 24hr LeChange.

    Carb was way off from Holley, I know they come built and ďtunedĒ but man. That plus I knew I was going to have to jet it down.

    Found the high speed air bleed on the primary side was a 70 on one throttle bore and 28 on the other

    So I took the 33ís off my Nova carb and slapped em on the secondary side since this carb is too big for a stock-ish 302. And left the 28ís on the primary. I put 65 jets on the primary and 68ís secondary. 8.5 power valve and put the linkage for my secondary accel pump back on but switched the cam to the ď2Ē position to give me fuel later.




    As you can see they were the same air bleeds on the left primary side.. Going to call Holley and see if they can send me some more air bleeds as this WAS there mistake.

    My car still has a sight putter on light throttle and this is due to being a lil too rich on the primary side OR I may need the next step up power valve. So I will hit that up next.

    Here is the motor all done up, going to put the air cleaner on later.


    All in all, idle/throttle is good, secondaryís pick up like a beast and starter is fixed an no more school of hard knocks.

    Yee!






    Sent from my iPhone using Tapatalk

  10. #35

    Default

    Going to set timing today. Itís locked out so maybe keep it at 30-32 and see what happens. Currently cars at a conservative 28. Iím running 91 but have yet to really see any knocking from this stocker. So might set timing to where I can get by with 87 and mark it on the dizzy itself. When ever Iím feeling heavy in the Right foot I can simply move the dizzy and fill er up 91.




    Sent from my iPhone using Tapatalk

  11. #36

    Default

    Update on well something.

    Set timing and adjusted the idle screws. Turned down fast idle and called it.

    Went on to more exciting things and helped build the short end of my buds 347. Not going into details as it has nothing to do with my build but looks bad to the bone.



    Whenís the last time you seen a white block?? Yeah yeah oil leaks. Well we have at least 10k miles


    Sent from my iPhone using Tapatalk

  12. #37
    FEP Power Member gmatt's Avatar
    Join Date
    Jul 2009
    Location
    Chicago, south subs
    Posts
    1,949

    Default

    Why the locked out timing? Just curious.

  13. #38

    Default Another 4 door build

    Quote Originally Posted by gmatt View Post
    Why the locked out timing? Just curious.
    Well #1 reason for me was consistency. I always when tuning found me putting lightest springs for max timing asap. I never ran a vacuum advance. And after running nitrous in my nova for 2 yrs. I got used to it. Not the best for starters. And tight converters. But I donít punch it really below 2k anyways.

    I think itís a personal preference like vacuum secondaryís vs double pumpers. Not the best for economy, but itís consistent, and Iím ready for some juice.........

    FYI i would never build a customer street motor with locked out timing.


    Sent from my iPhone using Tapatalk
    Last edited by 82MoreDoorFox; 12-16-2019 at 05:47 PM.

  14. #39

    Default

    Another pic with a random fox here at work.


    Returning the stall from Jegs and going to buy an bad ass wide band. I need it like I need a timing light. My donkey Dyno-meter is reaching itís limits. I plan on using it universal like a dyno.

    Also,
    I think Iím getting bad signal at low rpm 800-2000 from the carb and the plenum on the Edelbrock RpM is divided so I will try a spacer if that works I will cut the divider down a bit.








    Sent from my iPhone using Tapatalk

  15. #40

    Default

    Update to the board:

    Once I flip this Camry I got a 95 GT that I can grab for $1,500. Body is crap but I will be doing the full swap from suspension to tank and dash/door panels. So I can make the 82 smog legal and I will bar it. So until then I will be holding off on buying anything. I think allís I will need is to figure out the trans crossmember. But Iíll deal with that another day.




    Sent from my iPhone using Tapatalk

  16. #41

    Default

    Since it's an '82, you won't have any problem with the trans crossmember. Just get a late Fox double hump one and bolt it up!

    Tank might even fit okay, since you have the flat bottom trunk! SN95 filler neck won't work, but your original might. Being an '82-83 solves a LOT of problems on these cars.
    Last edited by ZephyrEFI; 01-13-2020 at 08:40 AM.
    Brad

    '79 Mercury Zephyr ES 5.0L GT40 EFI, T-5
    '17 Ford Focus ST
    '14 Ford Fusion SE Manual

  17. #42

    Default

    Quote Originally Posted by ZephyrEFI View Post
    Since it's an '82, you won't have any problem with the trans crossmember. Just get a late Fox double hump one and bolt it up!

    Tank might even fit okay, since you have the flat bottom trunk! SN95 filler neck won't work, but your original might. Being an '82-83 solves a LOT of problems on these cars.
    Looks like I got unluck with the trans cross member I have them at the house. It may be off the 64. I will try n look into the tank but goal is to be BAR legal swap and I think thatís tank included.

    I have a month or so to look into any tips. Thanks for the Info.


    Sent from my iPhone using Tapatalk

  18. #43

    Default

    Ok after thought, I will not be doing the dash swap. I like the look of the Fairmont and donít want to experiment on such a clean car. Also, keeping doors manual and eliminating just a whole bunch of bs.

    So with that said,

    Need to figure out how to install a semi-truck style shift knob. Along with shifter boot. Iím thinking like something in older vehicles. Just a rubber boot with an aluminum ring.

    Gauges are going to be upgraded to a digital 4 in 1 style for the left and GPS style MPH gauge.

    This route is going to net me the fastest turnaround time and hardest part should be dropping springs/swapping struts, running a new fuel pressure line/return line, tank swap, and dash/engine harness wiring. Kinda sounds like the whole build. But itís do-able.

    Iím thinking about a one week turn around. If all goes smooth. And I will be challenging myself with videos again and bringing my old YouTube account back to life.







    Sent from my iPhone using Tapatalk

  19. #44

    Default

    So with $$ being a factor, I need to clear space. Car is up for sale. To the right buyer, who can finish this project up. Asking $3500 obo with no amp/ sub if you take this price you get all extra parts I have, other intakes, bbk headers, 90 intake and a 600 vac sec carb.

    *** the new 650 carb I am keeping!! Itís too big for this setup anyways. Will be using on my 454 to keep fuel to a min and be able to drive that to work as needed.

    Any questions reply.


    Sent from my iPhone using Tapatalk

  20. #45
    FEP Senior Member waggin's Avatar
    Join Date
    Sep 2009
    Location
    Mount Vernon, WA
    Posts
    580

    Default

    Quote Originally Posted by 82MoreDoorFox View Post
    Update to the board:

    Once I flip this Camry I got a 95 GT that I can grab for $1,500. Body is crap but I will be doing the full swap from suspension to tank and dash/door panels. So I can make the 82 smog legal and I will bar it. So until then I will be holding off on buying anything. I think allís I will need is to figure out the trans crossmember. But Iíll deal with that another day.




    Sent from my iPhone using Tapatalk
    Famous last words for anyone interested in vehicles... (text in bold red)

    Well, bummer that you're selling it now. Was enjoying the read about all your trials and tribulations building and running it.
    '78 Fairmont Box Top w/Straight 6/3-spd Manual Everything
    '81 Zephyr Wagon 4/4-spd
    '84 Mustang SVO 5.0 Swapped semi-junker (I didn't do it!)
    MAF, GT-40, BBK Shorties

  21. #46

    Default

    Quote Originally Posted by waggin View Post
    Famous last words for anyone interested in vehicles... (text in bold red)

    Well, bummer that you're selling it now. Was enjoying the read about all your trials and tribulations building and running it.
    If I donít get it I will. But I could use money and I have two other projects I can finish right now.


    Sent from my iPhone using Tapatalk

  22. #47

    Default

    Hey guys FYI,

    Putting this thing for part out. I will put in the right section. I got good parts but the car wonít sell as a whole so Iíll let go a good chassis, motor is a high mileage but forged 5.0. Trans has some good parts but could use a kit and a lockdown lever if needed as I cut to run the linkage. New drive shaft I might keep for future builds as itís a solid 3Ē. Car has good speakers that go with it. But if you would like to finish I can sell you the shell with my cousins 95 for the swap for a good deal. The cobras are original so I will sell them separate since they are not scrubbed at all just paint blemishes from being a daily.

    Sorry to kill the thread but rent is killing me here In The bay and I have my 69 nova that I would rather build. One project at a time for me. And I need to focus on my savings. So with that being said. RIP TO THIS THREAD.


    Sent from my iPhone using Tapatalk

  23. #48

    Default

    Car is also clean title only 71k. And I think Im 3rd owner. There is much to discuss and I do have a trailer if the buyer would like to pay the fee. Let me know. Going on Craigís this week. You guys have first lick.



    Sent from my iPhone using Tapatalk

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •