I’ve been searching this forum all week and coming up with great information however any search with the words “frame” and “rail” only bring up the front frame rail posts. Has anyone here done a rear frame rail? If so do you have any info or tips on doing this job? I’ve found a few measurement posts which are helpful, but nothing specific to a rear frame rail such as shown in the link below. The car I purchased was sitting in a yard since 1995 in Maine so the majority of the floor pans and other pieces underneath suffered pretty severely. We’re looking at replacing the trunk floor pan, driver and passenger floor pans, front and rear frame rails, and torque boxes. (I’m sure there’s other things that will surprise us along the way)
https://lmr.com/item/LRS-871R/87-93-...gaAkwwEALw_wcB
Thank you
Connect With Us