Close



Results 1 to 2 of 2
  1. #1

    Default Fill all holes in Maximum Motorsports subframe connectors?

    I'm in the middle of installing the MM subframe connectors. The directions say to fill the tiny holes in the sides to avoid rust. They don't mention anything about the larger (pea-sized) holes on the read end caps of the connectors. Are those also supposed to be filled? Seem weird to cover some for rust and not others, but not sure why it isn't mentioned in the instructions.
    Attached Images Attached Images  

  2. #2

    Default

    Referencing a copy I have of MMFL-1 r3 instructions, a note at the end of step 2 indicates you can weld it closed or seal with silicone.
    Thomas

    1985 Mustang GT - Build Thread
    347 (Stock Block, Scat Crank & Rods, Probe Pistons, 11:1 CR, AFR 185's, PP Crosswind Intake, Custom-ground Comp Hyd Roller Cam, Scorpion 1.6 Roller Rockers, Holley 3310-4), T-5, 8.8 w/3.55's, MM SFC's, T/A, PHB, LCA's, Strut Tower Brace, K-Member Brace, Bilstein HD Struts/Shocks, MM/H&R Springs, SN95 5-Lug, Cobra Brakes, '04 Mach 1 Steering Rack

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •