Looking for some ideas here.
I just finished up the 5-lug, 8.8, sn95 booster/master cyl/caliper swap on my pace car. I ended up replacing the rear lines, as well as the front and rear rubber hoses. I went to bleed the brakes and I'm getting nothing from the rear (drums, not disc). I can bleed both front brakes, but nothing at all from the rear. I'm using a might vac pump because I don't have a helper, but I also tried using a 1-man bleeder bottle and pumping the pedal. Left rear bleeders open all night and that didn't work, either. Master cylinder was bench bled with no issues, as far as I could tell. Rear cylinders are brand new and I pulled both bleeder screws and made sure nothing was clogging them.
What am I overlooking here?
Connect With Us