I am working on getting the power door locks working on my 86 GT vert, and of course it's being a PITA.
My car had the actuators, but was missing one switch/socket entirely, and one switch. I have access to a few other 85/86 doors, and used them as donors for the parts. I pushed a switch into the socket on the passenger side, and wired up the drivers side and added the switch. The passenger side switch works as expected, and works with both actuators. The drivers side switch does nothing.
I swapped the switches around to test for a bad switch, but the drivers side switch works in the passenger side. This leads me to thinking I am having a wiring issue. I messed around with a multi-meter for a while, and do not see 12V across any of the leads. I checked the 1986.pdf wiring diagram and confirmed that all the wires are connected in the correct order.
Anyone have any ideas on troubleshooting steps or a solution?
Thanks!
Connect With Us