84 5.0 CFI air cleaner gasket

[fgross2006]

Anybody know the correct part number for the CFI air cleaners gasket?

I tried to pick up one at autozone but the Felpro 60038 was too small inside diameter. It was the only part they had in stock.

I dont mind ordering and waiting I just would like to correct part number if anyone know it.

[tbirdman]

Ford part number for the air cleaner to carburetor gasket on 84 and 85 5.0 automatic cars is D8ZZ 9654-A.

[gr79]

Fel-Pro 60038 is 5.0312" id. For std Holley 2V and 4V carb. Just bought one for mine.
Fel-Pro 60379 (D8ZZ-9654A) is 5.375" id. Many Ford apps. Assuming this is the bigger one you need.

Doing a AZ web check, under gaskets, fuel system, air cleaner mounting gasket, both sizes show up.
Both sizes are listed for 5.0 TBI.

Freeport NY, Freeport store= none.
Baldwin and Bellmore stores have them. 516-377-1049, 516-826-2533
Plus stores in East Meadow, Levittown, Bethpage.

[KevinK]

I got a cfi (carb) rebuild kit from Napa and I’m pretty sure it came with the gasket. I know the carb and cfi air cleaners are different so I would expect a different gasket.

[xctasy]

I got a cfi (carb) rebuild kit from Napa and I’m pretty sure it came with the gasket. I know the carb and cfi air cleaners are different so I would expect a different gasket.

Fel-Pro 60038 is 5.0312" id. For std Holley 2V and 4V carb. Just bought one for mine.
Fel-Pro 60379 (D8ZZ-9654A) is 5.375" id. Many Ford apps. Assuming this is the bigger one you need.

Doing a AZ web check, under gaskets, fuel system, air cleaner mounting gasket, both sizes show up.
Both sizes are listed for 5.0 TBI.

Freeport NY, Freeport store= none.
Baldwin and Bellmore stores have them. 516-377-1049, 516-826-2533
Plus stores in East Meadow, Levittown, Bethpage.

Every M code CFI air cleaner uses the 5-3/8" 2-bbl CFi flange tangs and as JACook and others have observed, a 1/4" bigger base diameter than the 4V, so it won't fit any 4150/4160 or 4180c properly with out work.

Every M code 4V HO has the Ford's smaller version of the 5-1/8" Holley 2 and 4bbl upper carb flange, but with a tight twin metal tang.