351 Whats it worth?

[jovibuilt]

351 Windsor bored 40 over stock crank small dished pistons, new eagle rods, new trick flow stage ll roller cam and new retrofit trick flow roller lifters and new afr 185 60cc heads,new canton fox body oil pan. A local guy was building it and lost his job. All machine work done by a good local shop and assembled by them. Any guesses on HP?

[Adriver]

It is really hard to guess on HP levels. But I did read and article where a guy built a very similar engine. It was .020, over used about the same size cam and a set of aluminum heads and the engine made just over 500hp. That was with a stock crank and rods. Top end package and compression ratio will dictate your HP, but I would say you will be in the same ballpark as the engine I just described.


Sent from my iPhone using Tapatalk

[jovibuilt]

I can pick it up for $2500

[mmb617]

That sounds like a very good price to me. The heads alone are worth a good portion of that.