Close



Results 1 to 11 of 11
  1. #1

    Default 86 capri rs ttop dreamcar

    My dad had the car 18 years and I've had it for 5 years been collecting parts and past few months have finally got to start on it. Got a lot left but coming together slowly

    Sent from my SM-G965U using Tapatalk

  2. #2

    Default

    Looks like a fun project. What color are you painting her?

  3. #3
    FEP Power Member Hemlock's Avatar
    Join Date
    Jan 2007
    Location
    Quartz Hill, California
    Posts
    2,230

    Default

    Should be a cool project! Good luck with the build!

    Robert
    1984 RS 347 Capri, To many car parts to list, check out my car build page here for the story on my car and a full parts list/setup!:

    My RS in Action

  4. #4
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    14,206

    Default

    Looks like a project I would take one!

    I completely understand the slow progress, although it appears you're kicking my butt! Good Luck with the Capri and keep the pictures coming.
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Stalled RestoModification
    1984 SVO Still Waiting Restoration
    1986 GT Under going Wide Body Conversion Currently

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  5. #5

    Default

    Thank you
    Going back with the factory red and grey on bottom, but limited with no welder and cash so I have to do floor pan repair before I can do the In side. Making it exactly how it rolled off the dealer lot

    Sent from my SM-G965U using Tapatalk

  6. #6
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    14,206

    Default

    I feel your pain.

    I have a welder, I have the floor pan, but just haven't had the spare time to get it done on my 82 RS!

    Name:  2017-09-07 19.13.38.jpg
Views: 190
Size:  116.4 KB
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Stalled RestoModification
    1984 SVO Still Waiting Restoration
    1986 GT Under going Wide Body Conversion Currently

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  7. #7

    Default

    Oh yeah you do. Nice car though I love the ttops but when they leak it become bad quick. I got in a tight spot so I sold my pans and trans for it. but front pans were good. It was the back pans and where it rolls up to rear seats. Now my job has changed so i wont get much time to work on her. I still have fuel lines and brake lines to run and find a trans after floors are fixed. But all in time I did as much as I could for now.

    Sent from my SM-G965U using Tapatalk

  8. #8
    FEP Super Member NAVYCAT's Avatar
    Join Date
    Jul 2004
    Location
    Montebello, CA
    Posts
    3,435

    Default

    good luck with the rebuild, it will be fun
    2017 Ford Explorer Sport (DD) 1986 Capri 5.0 Silver/Red
    1969 Falcon XW GTHO coupe (SOLD) went to Australia
    Past 4 eyes-
    4th. 1981 Capri "White" Black Magic I6
    3rd. 1984 Capri RS V8 Black/grey
    2nd. 1984 Capri RS V8 White/red
    1st. 1984 SVO Grey/grey (traded it for a worn out 1970 BOSS 302)
    Both '84 Capri's vin# were 10 away from each other
    U.S. NAVY 1980-2009

  9. #9
    FEP Power Member craigerSS's Avatar
    Join Date
    Jun 2009
    Location
    nova scotia
    Posts
    1,375

    Default

    Another one saved,good luck with your project
    here's to the freakin' weekend,I'll drink to that

  10. #10
    FEP Member SECESH's Avatar
    Join Date
    Sep 2010
    Location
    Catlett's Station VA
    Posts
    161

    Default

    Is that gooseneck flatbed also a rollback? Good googamooga the junk I could drag home with a rig like that.
    Married to the same Mustang since 03/29/82

  11. #11

    Default

    Thank you guys. I'm just waiting till the funds and time come in to get her finished and back to her showroom stance.
    And it's a gooseneck tilt trailer. Got a winch on the front so tilt up and drag on

    Sent from my SM-G965U using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •