Me ..... worked on getting an engine nailed down for my 85 Saleen project.
Me ..... worked on getting an engine nailed down for my 85 Saleen project.
-- James
Favorite thing I’ve said that’s been requoted: “"40 year old beercan on wheels with too much motor"
My four eyed foxes:
"Trigger" - 86 Mustang GT - Black with red interior. 5.0 T5 built as Z. Original motor ~1/2 million miles. 18 yr daily, 10 a toy
"Silver" - 85 Mustang Saleen 1985-006? (Lol) Rare 1E silver GT / charcoal interior. The car is a little bit of a mystery. Current project bought as a roller, tons of Saleen / Racecraft pedigree
Also in the stable - my son’s car. 1986 Mustang GT Convertible. Black/Black/Black conversion. 93 leather. VM1 ECU. T5Z
past foxes -
1989 Mustang LX Sport 5.0 AOD white/tan black top. Once I ran this one down I caught a wife.
Wife also had a 1987 Thunderbird Turbo Coupe in the 90's.
I'm a four eyed pride supporter, are you? Become one today!
http://vb.foureyedpride.com/payments.php
Untarped it. Covered only the greenhouse part.
Been below zero for most of the week. No garage. In 5 days span, from -40 wind chill to forecast 50 Monday.
Doors opened fine, no sticky locks. The Ranger doors freeze up with the door seam up on the roof.
Battery maintainer has been plugged in all week.
Going to be 58 tomorrow, need to uncover and take him for a drive.
Scotty
1985 Fox Notch 4-banger Ranger tube header Eastwood Royal Blue
1988 Fox LX 5.0 AOD Vert BBK 170mph speedo Candy Apple Red
1999 Mustang Coupe V6 Auto Chrome Yellow -Daily Driver.
Past Pony's.....
68 Coupe Inline-6 3-Speed-Man. Primer
78 II Hatch 302 3-Speed-Auto Sunroof Black
81 4-Eye Coupe 4-Banger 4-Speed-Man. White
Welp i had to relocate the herd for a couple weeks so today moved 6 cars then the rest tomorrow.
got the old engine out and tore it down. Was rebuilt somewhere down the line. Crank was turned .10/.10, bored .30 over with new pistons....all that care and the rods were installed wherever the builder threw them lol totally out of order.
Removed the eec and associated wiring and sensors, vacuum lines etc and started the cleanup of the engine bay. What a mess of snakes that was lol
Walked by my 82 RS about 30 times today and did absolutely NOTHING to it!
I did start cleaning up the good used floor pan for it a bit yesterday. Nothing worthy of pictures, but did cut/drill/grind the extra firewall metal off the pinch weld at the front. I hammer and dollied the sides to straighten up all the spot welds cut out. Just need to finish cleaning everything up and then a LONG Weekend to cut out the original and weld in the new floor.
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
A little snow this morning.
Mike
My '78 Fairmont build - http://vb.foureyedpride.com/showthre...539-78-Big-Red
Well today I unwrapped the wire harness and separated the engine harness from the light harness. Got the light harness fixed up and wrapped with new plastic split loom protector and tucked away up the drivers side fender well...that was the easy part lol. Tomorrow I'll start repairing the few burned wires I found in the engine loom.
Well, today I went to a jy to look at a 4 eye they had listed on cl for a battery tray and the washer bottle reservoir I need. I was so bummed out it was picked clean except the dirty engine with rat turds all over it. Looked a little closer and scored a performer intake for $50 woohoo.
Just finished putting on the new timing cover and polished aluminum water pump on the RS. My old cover had a few stripped out bolts and was driving me crazy with oil leaks. The water pump was just an upgrade that I figured I would do seeing as I had it all apart. All fixed now!
Robert
1984 RS 347 Capri, To many car parts to list, check out my car build page here for the story on my car and a full parts list/setup!:
My RS in Action
Indicative of the non-care shoddy practices of some of the conveyor belt "rebuild" industry, probably grabbing rods to use out of a bulk bin of 'em. Do it yourself, folks, or be the supervisor of it all working with a machine shop or builder. Nobody is going to take care for whatever is your engine or is to become your engine than YOU. The '89 truck 302 engine that I took apart back in the summer also has 10-under crank journals and 30-over cylinders and flat tops, and by the looks of everything, not too many miles ago... but, there was no oil hole chamfering done on the journals, 6 of 8 pretty new looking flat top pistons have small skirt cracks (maybe from a pi$$ pounding, and/or the much-loved "cold drive-ability" common since fuel injection, maybe from overheating (no other signs of that), etc...), and there were also nonsense numbered rods in it... as in some with no legible numbers, two # 7's (neither AT # 7), etc... albeit all rods installed correctly with the larger crank bore chamfers located at crankshaft journal ends. I have number stamps, and will be properly numbering them before replacement pistons go back on.
Mike
1986 Mustang convertible ---> BUILD THREAD
Past Fox-chassis "four eyes":
1983 Mercury Cougar LS
1986 Ford Thunderbird ELAN
1980 Capri RS Turbo
Work in progress website ---> http://carb-rebuilds-plus.boards.net/
Just received a half dozen heavy long boxes... cylinder heads!
Mike
1986 Mustang convertible ---> BUILD THREAD
Past Fox-chassis "four eyes":
1983 Mercury Cougar LS
1986 Ford Thunderbird ELAN
1980 Capri RS Turbo
Work in progress website ---> http://carb-rebuilds-plus.boards.net/
Brushed off frozen snow. Partially tarped, parked for now. Car told me (wear sensors) it needs ft brake pads.
Melting icy snow sheet slid down the hatch glass. Good for a couple more pounds of down force from weight alone...
Attachment 126279
Last edited by gr79; 02-14-2019 at 07:09 PM.
Have a couple of days off of work and several feet of snow on the ground but I couldn't wait any more. Moved her into the garage and gonna start to polish and clean. It's supposed to start warming up, probably won't be able to drive until May (she doesn't see rain or snow), but it's a start I guess.
Not directly to my car but I started putting up my spare parts for sale locally. I have a parts new edge and sn95 which will be donating a good share of brakes/diff and other underpinings. I also bought a parted out 1980 cobra just mulling over wether to use the cobra front end and hood on my car or sell it to make back some of my money. Kinda liking the idea of putting it on right now. But I will replace the factory hood with a 2.5 cowl hood.
1985 Mustang Canadian Cobra
It ain't Pretty but it doesn't care
Yesterday I finished fitting and welding in the donor floor for my 82 RS.
Now its up on blocks for the Maximum Motorsports SFC install, then it will get mounted on the rotisserie.
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
I finished off the rear disk brake, cables and the handle conversion, made up a new trans harness from different wires.
2017 Ford Explorer Sport (DD) 1986 Capri 5.0 Silver/Red
1969 Falcon XW GTHO coupe (SOLD) went to Australia
Past 4 eyes-
4th. 1981 Capri "White" Black Magic I6
3rd. 1984 Capri RS V8 Black/grey
2nd. 1984 Capri RS V8 White/red
1st. 1984 SVO Grey/grey (traded it for a worn out 1970 BOSS 302)
Both '84 Capri's vin# were 10 away from each other
U.S. NAVY 1980-2009
Actually had a nice day last weekend so I uncovered it and took it for a short ride. First time in about 6 weeks.
I also ordered new wheels/tires from LMR. Wanted a 5 spoke but don't have the coin to swap to 5 lugs right now so I got the Race Star 5 spoke.
Short video of the exhaust note from last year.
I spent the evening after work picking up my explorer shortblock and cleaning it up. Managed to get the new cam, timing set, and oil pump and pickup all bolted up before I ran out of day light.
Sent from my iPhone using Tapatalk
1984 LTD LX, 160k mile Explorer 5.0, Comp XE264HR-14 cam, Alex’s Parts springs on stock GT40 3 bar heads, Unported Explorer intake, 1 5/8 shorty headers, off-road H-Pipe, Spintech 9000 mufflers, Holley Terminator X Max, J-Mod 4R70W, Mustang 8.8 w/ 3.73s, Tubular front and rear control arms, front coilovers, Turbocoupe rear coil springs
Subrame connectors welded in finally!
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Wew snuck in front brake pad job. Outdoors, no garage.
DS inner pad was gone. Other 3 were down to rivets. Parked for a month, waiting for weather break from cold.
Have had tools and parts staged since Monday, with warmth (with rain) predicted for today.
11mm and lug nut socket, c-clamps, air impact, jack, foam ground pads, insulated overalls, coffee.
A rare 50-60 degree March with severe rain events predicted.
Job took 1 hour total. Fastest ever did that. Pit crew attitude worked out.
Morning rain, 2 hour window with some sun, then rain again.
Thunder claps as torquing lug nuts.
Got soaked but everything was put away.
62 now. Severe weather moving into area. Back to the 30's again tomorrow.
For the record, old pads were Raybestos MKD-151, lasted 87,000 miles.
Replaced with same (NPD Raybestos SGD151M M2001-2A). Reused both grasshoppers.
LF caliper replaced 1/87, RF replaced 7/99. EIS rotors 1/87, 150K on them.
Overall, pads on both sides had almost even wear. All will be replaced later this year.
Need new cowl grill and w/s plastic center cowl trim. 40 year old plastic is cracked bad beyond further repair.
Last edited by gr79; 03-14-2019 at 09:34 PM.
Installed my new gas tank, with new pump, filled up the diff with gear oil after installing the disc brakes on the rear .... then just sat there thinking about whats next
2017 Ford Explorer Sport (DD) 1986 Capri 5.0 Silver/Red
1969 Falcon XW GTHO coupe (SOLD) went to Australia
Past 4 eyes-
4th. 1981 Capri "White" Black Magic I6
3rd. 1984 Capri RS V8 Black/grey
2nd. 1984 Capri RS V8 White/red
1st. 1984 SVO Grey/grey (traded it for a worn out 1970 BOSS 302)
Both '84 Capri's vin# were 10 away from each other
U.S. NAVY 1980-2009
Connect With Us