Hi guys,
We recently bought a 1979 Fairmont Futura as a twin to our 1979 Mustang notch.
The notchback is a racing project with FMS crate 302,T5, 8.8 with 4.10 gears and upgraded suspension
fairmont is a daily driver with the 2.3L and manual trans planning on a 2.3T swap in the future
I'm transplanting suspension parts from the mustang and ordering some parts to get the fairmont on the road, and would greatly appreciate some feedback or suggestions ,as shipping and taxes to get them to Belgium are no joke.
I've been prepping SN95 parts for the notch to replace/upgrade what i take out and read through most suspension threads on the forum and think the setup below should do the trick.
All control arms are rusted through so need replacement anyway.
FRONT
- 1988 control arms (from notch)
- 1988 spindles (from notch)
- 1988 calipers, rotors (from notch)
- Koni STR (red, non adjustable)
- FMS B springs
- Maximum motorsport camber plates
REAR
- Maximum motorsport upper control arms
- Maximum motorsport lower sport control arms with shock mounts
- Koni STR (red, non adjustable)
- FMS B springs
Thanks Robin & Liselot
Connect With Us