Close



Results 1 to 5 of 5
  1. #1

    Default 1980 Interior Vacuum Diagram (HVAC, Blower, etc.)

    Anyone know where to find an HVAC vacuum line diagram for the early Foxes? I can only find 1960s and aero cars (87-93) via Google images and my Haynes manual does not have a good diagram. I took the dash on my '86 apart last night to see fi they are the same, but they aren't. It may be close enough to figure out, but if I had a diagram I'd feel better than just winging it until I get it right.

  2. #2

    Default

    Find it here.
    http://myzephyrs.com/ac_vac_and_flow.htm
    Same as Mustangs.
    Lots of FREE F/Z info on my site.
    http://myzephyrs.com

  3. #3

    Default

    Quote Originally Posted by RED 78' View Post
    Find it here.
    http://myzephyrs.com/ac_vac_and_flow.htm
    Same as Mustangs.
    Thank you. I'll give it a try!

  4. #4

    Default

    Here are the 1980 Mustang Capri AC diagrams from the manual I have. Hope that helps...


    Current FEP:
    1980 M81 McLaren Carb Turbo 2.3T #003P ... IT'S ALIVE after a 22 year slumber thread!

    Past FEP:
    1986 Capri GS 5.0- very missed but in goods hands
    1985 LTD SSP- quick little fox 5.0

  5. #5

    Default

    Quote Originally Posted by m81mclaren View Post
    Here are the 1980 Mustang Capri AC diagrams from the manual I have. Hope that helps...
    Thank you. I *think* I have the vacuum lines sorted out now. I'm working to get the blower motor functioning and get all the loose ends figured out for the radio, gauges, and what won't be needed long-term. I replaced the blower, but not the resistor. I am going to replace it next and see if that fixes the issue. It woon't hurt to have a new one in there anyway since the other is the original '80 I believe.

    Where are you at in Nor Cal?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •