Close



Results 1 to 7 of 7
  1. #1

    Default Pace car decal question

    I am putting new decals on my pace car but the new decal that goes behind the drivers door is to long. I was wondering if someone with original decals could measure the space between the may 27, 1979 on the drives side so I can see if thatís why it donít fit. Thanks

  2. #2
    FEP Supporter Broncojunkie's Avatar
    Join Date
    Jan 2015
    Location
    Barboursville, WV
    Posts
    776

    Default

    The new decal kits are too long in that area. They can be trimmed before applying. The manufacturer has known of the problem for years and never fixed it. The new one will go on the wheel arch slightly. The original ended just before the wheel arch. I had a buddy apply the decal kit on my pace car and left it as-is, but I'm not really a perfectionist. Many things about my car are much better than factory...a couple things could be a little better. No big deal, since mine isn't a show car.

  3. #3

  4. #4

    Default

    I have seen pictures. I was just wondering if they tightened up the spaces between the date on the drivers side to make it fit. Could you measure the space between the date to see if its closer than the passenger side. Thanks

  5. #5

    Default

    Yes I will this afternoon. Measure between month day and year?

  6. #6
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO/RR TX
    Posts
    11,881

    Default

    Driver Side measured from the quarter panel edge

    Name:  2018-10-16 13.52.35.jpg
Views: 23
Size:  67.7 KB

    Driver Side measured from the start of the lettering

    Name:  2018-10-16 13.53.29.jpg
Views: 22
Size:  63.6 KB

    Passenger Side measured from the start of the lettering

    Name:  2018-10-16 13.53.08.jpg
Views: 22
Size:  56.4 KB
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Ongoing RestoModification
    1984 SVO Awaiting Restoration
    1986 GT Wrecked by PO, but still want to save!

    Current Capris:
    1981 Capri Roller
    1981 Capri Black Magic Roller Basket Case
    1982 Capri RS 5.0/4spd T-top Full Restoration Underway
    1984 Capri RS T-top Roller
    1983-84 Gloy Racing Trans Am/IMSA Body Parts

  7. #7

    Default

    Thanks for the pictures and measurements. Looks like they tightened up the spacing on the drivers side. I guess Phoenix graphics just prints off two of the passenger side letters. You think they would have gotten measurements from the factory ones so they are right. Guess not

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •