Hi,
I've been struggling to get my stinger front mount installed since right in the middle of the return is the power steering cooler lines. I added this when I replaced the radiator support since the replacement had it. I've tried moving them, bending the bracket etc. and nothing is getting them out of the way.
Looking at lots of other non-SVO 2.3 turbos I don't see that they had the cooler from the factory.
So I want to remove mine and see if that helps with the intercooler fitment issues.
How does the non-cooler lines run from the rack back to the power steering pump? looking at the hoses (before I take it apart) I don't see how not to kink the hardline out of the rack, or loop it right into the fan belts
Thanks
Chris
Connect With Us