What's the easiest way to cut off the quAd shock brackets?
What's the easiest way to cut off the quAd shock brackets?
On the body ? they unbolt .
The axle , use a 4 inch angle grinder and a thin cut off wheel .
Can I ask why you want to remove them ?
clowns to the left of me , Jokers to the right
I'm installing NRC cobra disc brakes. The anti-moan brackets may interfere with the old mounts. I'm running coilovers.
I used the plasma cutter the take off most of the bracket, then a 4.5 inch grinder to get rid of the rest. Just remember, the thinner the blade, the faster and cleaner the cut. The thinner the blade, the faster it wears out. Buy at least three, they are cheap. I also use the thin blades when I need the grinder to flex a bit.
I removed mine for the old 82 slapper bars, but now have the Cobra Brakes and MM lower arms.
Good luck
Kenny
Im confused. Why do you want to remove the brackets? Just because, or because you think the anti moan brackets will not fit otherwise?
They will fit. I have 95 cobra brakes with quad shocks and anti moan brackets both. No problems,no interference
Connect With Us