Close



Results 1 to 3 of 3
  1. #1
    FEP Supporter vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    436

    Default SN95 Sway Bar Brackets for Fox Body, 1985 GT Sway Bar Brackets, Freshly Powdercoated

    I have two sets of these for sale.

    First is a set from an SN95, that used on the Fox Body lower the sway bar by about 1.5". Good for clearance for a Coyote oil pan, or for Mod motor, install, etc.

    $50 shipped for the set

    Name:  swaybrackets.jpg
Views: 79
Size:  87.4 KB

    Second is a pair of freshly powder coated 1985 GT Sway bar mounts, in excellent condition. Will fit all 1993 and earlier Fox Body's.

    $35 shipped for the pair.

    Name:  85swaybrackets.jpg
Views: 79
Size:  139.7 KB
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

  2. #2
    FEP Power Member richpet's Avatar
    Join Date
    Mar 2003
    Location
    Lowell, Oregon
    Posts
    1,235

    Default

    Does using the sn95 brackets require a different length rod at the control arm end?
    It's been a while since I studied these details.
    83 5.0 GT. Quicker than it looks! 10:1 (or just over) 306, Motorsport a332 cam, 140A alt, t5 conv, 8.8 w/ 3.27's, Edel rpm, alum rad, very worked e7's, Holley SA carb, etc... SOLD IT!!!!

    Now have a 1981 Granada!

    "Never underestimate the power of stupid people in large groups"

  3. #3
    FEP Supporter vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    436

    Default

    Nope, I am using a set just like these, and am using the same ends that I had with the stock mounts.
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •