Good evening yall, I am finishing up a V8 swap on an 86 coupe and have some questions about wire harness differences. I tried looking through the diagrams posted and cant seem to have any luck. My car was a 4 cylinder auto and I got the harness out of a 86 GT with a five speed. I have the engine harness and body harness from the GT installed and all of the connectors that would match up connected. There are 8 connectors that dont match up and wanted to see if they are things I will need. The first 3 photos are apart of the V8 harness and attaches to the dash from the engine bay on the drivers side. I believe that the two butterfly connectors are for the clutch pedal assy. which I dont have yet...(5 speed swap planned.)
The next 4 photos are where the dash harness connects to the body harness and runs to the rear. These two are from the 4 cyl harness into the dash.
And these two are from the GT harness to the rear.
Any help identifying these would be much appreciated.
Sent from my SM-G950U using Tapatalk
Connect With Us