Close



Page 1 of 4 123 ... LastLast
Results 1 to 25 of 92
  1. #1

    Default 20 year collection of Fox Mustang stuff

    I'm selling my all fox mustang stuff. Some if the things I'd be willing to ship, other stuff pick up only. I can text pictures of things if you want. Prices are pretty low, but I will consider best offers. I'm located in Rome NY.

    460 Swap into fox mustang headers, 2" primaries.
    Motor plate. $300.
    CSI electric water pump $100.
    460 stud girdle with polylocks $25.
    ---------------------------------------------
    351w turbo kit hot side pipes, $50.
    351w shorty swap headers, $50.
    351w Ford motorsports intake, just like Victor Jr., $50.
    351w ProComp Single plane EFI intake with elbow, $150.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.
    351w Scat cast steel stock stroke crank $25.
    -------------------------------------------
    Windsor Sr. heads, ported, bare, fits 2.02" int. and 1.60" exh valves, $300.
    Comp Cams XE282HR cam, Hydraulic roller, 232 int, 240 exh @.050 lift, $75.
    Custom turbo cam, 221 int, 230 exh at .050" lift, .554" int .526" exh lift, Lobe seperation 116, $75
    302 or 351 timing covers, I have three, $20 each.
    302 oil pump pickups, $5 each.
    302 351w chrome valve covers, $20
    Bare 5.0 roller block, standard bore, $30
    302 shortblock .040" over, dissasembled, $50.
    1.6 aluminum roller rockers, $50.
    ---------------------------------------------
    76mm C&L mass air meter with tubes for 42#, 24#, and 19# injectors, $50.
    75mm P-Mass mass air meter, calibrated for 42# injectors, with flow sheet,
    silicon connector and clamps, $75.
    75mm Pro Products EGR throttle body spacer, $25.
    5.0 EFI fuel rail with Adjustable Fuel Pressure regulator, and gauge adapter, $50.
    1990 5.0 mustang EFI wiring $20.
    --------------------------------------------
    11" C-4 torque converter, 3000 stall, 10.5" bolt pattern, $50.
    9 1/2" C-4 torque converter, 3200 stall, billet cover, anti balloon plate, $200.
    J.W. Ultrabell blow proof SFI C-4 bellhousing, $100.
    5.0 T-5 transmission with bellhousing, $300.
    T-5 bellhousings $25.
    --------------------------------------------
    Flaming River manual steering rack, with adapter for use with power steering shaft, $150.
    Double hump transmission crossmembers, $10 each.
    Boxed stock Upper Control arms, $10.
    1987-93 Coupe quarter windows, $20.
    Maximum Motorsports Strut tower brace, $50.
    1979-86 Aluminum Front Bumper Bar, very rare, much lighter than steel, $100.
    1979-86 Steel front bumper bar. $20.
    Assorted fox mustang driveshafts, $20 each.
    ---------------------------------------------
    NEW Radiator Support, from Ford, $100
    3.73 8.8 rear end gears, $50.
    2.73 8.8 rear end gears, $30.
    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75.
    1995-04 front control arms, with poly bushings, and Steeda ball joints, $75.
    5.0 front sway bar with mounting brackets, $25.
    1979-86 center console with lid, $20.
    1979-82 taillights, one damaged, $10.
    1983-86 taillights, $25.
    1987-93 taillights, $25.
    1979 door panels, $20.
    6, 5.0 turbine factory aluminum wheels 15 x 7", four with tires, four center caps, $75.
    Hatch privacy shade, grey, $20.
    1987-1993 fuel level sender, NEW, $25.
    1987-93 gauge cluster, 140mph, $25.
    T-top glass tops, two passenger side, one driver side, $50 each.
    1979 fuel filler neck, might fit other years too, $20.
    4 fox mustang Throttle cables, assorted lengths, $20.
    Seat brackets, $20.
    5.0 rear springs, $20.
    5.0 front springs, $20.
    5.0 street/strip front springs, one coil cut, $25.
    Door moldings, 85-86, and 87-93, $20 a set.
    Interior trim, make offer.
    Exterior trim, make offer.
    Plastic inner fender liners $10.
    Cowl gauge holder, $10.
    8.8 Moser 31 spline Lincoln Mark 7/ SVO length forged axles, 5 lug, with studs, NEW in box, $150.
    8.8 Stock Lincoln Mark 7/ SVO axles, 5 lug, 28 spline, $25.
    8.8 Superior 31 spline, 5 lug, stock Fox length, with New bearing and seals, NEW axles, $200.
    5.0 engine accessory brackets,
    2.3 Garrett turbos, 60A/R comp, .63 A/R exh., $50 for the pair.

    Jess
    Last edited by FoxChassis; 04-09-2018 at 10:15 PM.
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  2. #2
    FEP Power Member tonysilver82's Avatar
    Join Date
    Dec 2011
    Location
    stanton,alabama
    Posts
    1,282

    Default

    send pics of the aluminum bumper 334-412-7399
    Last edited by FoxChassis; 04-09-2018 at 10:16 PM.

  3. #3
    FEP Super Member STANGMAN116's Avatar
    Join Date
    Mar 2013
    Location
    DENVER CO, the 303
    Posts
    2,813

    Default

    Interested in 87-93 coupe quarter windows shipped to 80022

  4. #4

    Default

    I'm local, I'd love to take at least these off your hands:

    351w shorty swap headers, $50.
    351w Ford motorsports intake, just like Victor Jr., $50.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.

    I'll PM you in the AM.
    -Randy
    '83 Mustang GL notchback - 351w - T5Z
    '84 Mustang GT350 20th Anniversary Hatch #2808 - 302 - T5
    ''92 Mustang LX Hatch - 2.3t - IRS (in progress)

  5. #5

    Default

    Intersted in the following:

    460 Swap into fox mustang headers, 2" primaries.
    351w ProComp Single plane EFI intake with elbow, $150.
    Comp Cams XE282HR cam, Hydraulic roller, 232 int, 240 exh @.050 lift, $75.
    76mm C&L mass air meter with tubes for 42#, 24#, and 19# injectors, $50.
    1990 5.0 mustang EFI wiring $20.
    Flaming River manual steering rack, with adapter for use with power steering shaft, $150.
    1.6 aluminum roller rockers, $50.
    Maximum Motorsports Strut tower brace, $50.

    and if NY5speed doesn't take them:

    351w Ford motorsports intake, just like Victor Jr., $50.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.

    I will send you a PM.
    Thanks, Jess
    Last edited by Flyin'Montdude; 04-08-2018 at 09:59 PM. Reason: forgot strut tower brace
    '79 Fairmont Futura
    '79 Mercury Zephyr wagon
    '83 LTD Wagon - future Mustang "Sport" Wagon
    '84 Mercury Capri RS - 5.0 5spd
    Owner of Victory Engines and Machining, LLC
    g2G

  6. #6
    FEP Member Boxtop78's Avatar
    Join Date
    Jun 2017
    Location
    Stockton,California
    Posts
    126

    Default

    I'm interested in your 1.6 roller rocker. Pedestal mount.? Pic. Please

  7. #7

    Default

    Sent ya a PM on the Garrett turbos.

  8. #8

    Default

    Interested in aluminum front bumper if still available.
    1985 Capri
    347 (Baker Engineering built, Dart block, GT40x, RPM air-gap, Mahle pistons, custom cam...)
    5 speed RS
    Ext - Red/Grey
    Int - Tan

  9. #9

    Default

    Manual steering rack, 351 shorty headers, 351 Ford Motorsport intake, 351 oil pan, and a timing cover sold pending payment.

    Thanks for all the reply's, I've been trying to keep up. Sorry if I take a little while getting back to you.

    Jess
    Last edited by Mustang-junky; 04-09-2018 at 08:22 PM.
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  10. #10

    Default

    Front bumper is available but I don't know how I would ship it affordably. It's too large to even put on a pallet. Lots of people interested in this one. They are way lighter than steel.

    Jess
    Last edited by Mustang-junky; 04-09-2018 at 08:24 PM.
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  11. #11

    Default

    Comp XE282HR, C&L mass air meter, 1.6 roller rocker arms, Strut tower brace, and EFI wiring sold pending payment. Thank you.

    Jess
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  12. #12

    Default

    Wish I was closer to you - would drive over for the bumper. Had a rear bumper shipped in a long box and it was not unreasonable. Problem most likely was finding the right box. I would mail you an empty box to have the bumper shipped back here :-)
    1985 Capri
    347 (Baker Engineering built, Dart block, GT40x, RPM air-gap, Mahle pistons, custom cam...)
    5 speed RS
    Ext - Red/Grey
    Int - Tan

  13. #13

    Default

    price on heads shipped? 39421

  14. #14
    FEP Power Member Saturn V's Avatar
    Join Date
    Jan 2011
    Location
    Houston, TX
    Posts
    1,289

    Default

    I've shipped a bumper cover in two tall "wardrobe" moving boxes from Home Depot ... put one on each end of the bumper and overlap in the middle, cut boxes along the length and overlap/tape to match diameter of the bumper. Look for boxes on the shelf that are beat up and ask the manager for a discount.
    Present: '84.5 Mustang GT T-top, '06 Mazdaspeed6
    Past: '79 5.0 Capri, '86 Buick GN, '90 Mustang GT, '92 SHO, '95 SHO
    Browse cover pages of my Fox Chassis related library

  15. #15

    Default

    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75. still up for grabs? if so dibs!!!! what would the price be shipped to phoenix, az? also what is the gear set up?
    Last edited by Sir Guts; 04-10-2018 at 03:56 PM. Reason: another question

  16. #16

    Default

    PM sent on 1979-86 center console with lid, $20.
    GLADLY burning the fuel your Prius is saving!!

  17. #17

    Default

    Quote Originally Posted by Sir Guts View Post
    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75. still up for grabs? if so dibs!!!! what would the price be shipped to phoenix, az? also what is the gear set up?
    It is still available. The set up stuff is extra frictions and steels for the limited slip, in case you want to restack them for a tighter limited slip. Some printed directions, and I'd have to check what else. What is the Zip code you want it sent to?

    Jess
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  18. #18

    Default

    Quote Originally Posted by slopoke76 View Post
    price on heads shipped? 39421
    I'll look into it, but it'll probably be really expensive.

    Jess
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  19. #19

    Default

    Quote Originally Posted by Mustang-junky View Post
    I'm selling my all fox mustang stuff. Some if the things I'd be willing to ship, other stuff pick up only. I can text pictures of things if you want. Prices are pretty low, but I will consider best offers. I'm located in Rome NY.

    460 Swap into fox mustang headers, 2" primaries.
    Motor plate. $300.
    CSI electric water pump $100.
    460 stud girdle with polylocks $25.
    ---------------------------------------------
    351w shorty swap headers, $50.
    351w Ford motorsports intake, just like Victor Jr., $50.
    351w ProComp Single plane EFI intake with elbow, $150.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.
    -------------------------------------------
    Windsor Sr. heads, ported, bare, fits 2.02" int. and 1.60" exh valves, $300.
    Comp Cams XE282HR cam, Hydraulic roller, 232 int, 240 exh @.050 lift, $75.
    Custom turbo cam, 221 int, 230 exh at .050" lift, .554" int .526" exh lift, Lobe seperation 116, $75
    302 or 351 timing covers, I have three, $20 each.
    302 oil pump pickups, $5 each.
    302 351w chrome valve covers, $20
    1.6 aluminum roller rockers, $50.
    ---------------------------------------------
    76mm C&L mass air meter with tubes for 42#, 24#, and 19# injectors, $50.
    75mm P-Mass mass air meter, calibrated for 42# injectors, with flow sheet,
    silicon connector and clamps, $75.
    75mm Pro Products EGR throttle body spacer, $25.
    5.0 EFI fuel rail with Adjustable Fuel Pressure regulator, and gauge adapter, $50.
    1990 5.0 mustang EFI wiring $20.
    --------------------------------------------
    11" C-4 torque converter, 3000 stall, 10.5" bolt pattern, $50.
    9 1/2" C-4 torque converter, 3200 stall, billet cover, anti balloon plate, $200.
    J.W. Ultrabell blow proof SFI C-4 bellhousing, $100.
    T-5 bellhousings $25.
    --------------------------------------------
    Double hump transmission crossmembers, $10 each.
    Boxed stock Upper Control arms, $10.
    1987-93 Coupe quarter windows, $20.
    Maximum Motorsports Strut tower brace, $50.
    ---------------------------------------------
    3.73 8.8 rear end gears, $50.
    2.73 8.8 rear end gears, $30.
    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75.
    1995-04 front control arms, with poly bushings, and Steeda ball joints, $75.
    1979-82 taillights, one damaged, $10.
    1983-86 taillights, $25.
    1987-93 taillights, $25.
    Hatch privacy shade, grey, $20.
    1987-1993 fuel level sender, NEW, $25.
    1987-93 gauge cluster, 140mph, $25.
    1979 fuel filler neck, might fit other years too, $20.
    4 fox mustang Throttle cables, assorted lengths, $20.
    Seat brackets, $20.
    5.0 rear springs, $20.
    5.0 front springs, $20.
    5.0 street/strip front springs, one coil cut, $25.
    Door moldings, 85-86, and 87-93, $20 a set.
    Cowl gauge holder, $10.
    8.8 Moser 31 spline Lincoln Mark 7/ SVO length forged axles, 5 lug, with studs, NEW in box, $150.
    8.8 Superior 31 spline, 5 lug, stock Fox length, with New bearing and seals, NEW axles, $200.
    5.0 engine accessory brackets,
    2.3 Garrett turbos, 60A/R comp, .63 A/R exh., $50 for the pair.

    Jess
    In this updated list I have removed the stuff I'm not interested in shipping. Sorry if you were interested in some of those items.

    Jess
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  20. #20

    Default

    I’ll take the hatch shade. Shipped to 98660. Let me know how much I owe you.

  21. #21

    Default

    I'm #2 in line for the hatch shade if no one else takes...and it retracts. 08743-New Jersey
    1984.5 GT 5.0 5 Speed ANALOG
    BBK Long Tubes/H pipe/FM
    Edelbrock Intake/Holley 600
    8.8 w/FMS 3.73s
    Steeda Shifter

    2010 GT 5 Speed DIGITAL
    Track Pack
    Pypes Violator axle back
    Airaid Cold Air

  22. #22
    FEP Super Member tORMENtOR's Avatar
    Join Date
    Oct 2007
    Location
    Bethlehem,PA
    Posts
    10,732

    Default

    Is the strut tower brace for EFI or Carb?

  23. #23

    Default

    Strut tower brace is sold. Hatch shade is spoken for.

    Comp XE282HR cam is sold, as is the C&L mass air meter, 1.6 rocker arms, and EFI wiring.

    Thanks.

    Jess
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

  24. #24
    FEP Power Member STL79Coupe's Avatar
    Join Date
    Dec 2009
    Location
    St. louis MO
    Posts
    2,464

    Default

    Jess, send some pics of the tails when you get a chance.
    Keith formerly STLPONDS
    '79 V8 coupe in the works!
    Build thread http://vb.foureyedpride.com/showthread.php?t=89153

  25. #25

    Default

    Quote Originally Posted by Mustang-junky View Post
    It is still available. The set up stuff is extra frictions and steels for the limited slip, in case you want to restack them for a tighter limited slip. Some printed directions, and I'd have to check what else. What is the Zip code you want it sent to?

    Jess
    Hate to be this guy but life kicked me in the butt and I am strapped for cash now so I wont be able to take it off your hands right now but if you still want to price check it for 85023 and if you still have it in a couple of weeks ill still take it but for the time being ill have to say give it to someone else if they want it...

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •