Close



Results 1 to 25 of 42

Threaded View

  1. #1

    Default For sale 20 year collection of Fox Mustang stuff

    I'm selling my all fox mustang stuff. Some if the things I'd be willing to ship, other stuff pick up only. I can text pictures of things if you want. Prices are pretty low, but I will consider best offers. I'm located in Rome NY.

    460 Swap into fox mustang headers, 2" primaries.
    Motor plate. $300.
    CSI electric water pump $100.
    460 stud girdle with polylocks $25.
    ---------------------------------------------
    351w turbo kit hot side pipes, $50.
    351w shorty swap headers, $50.
    351w Ford motorsports intake, just like Victor Jr., $50.
    351w ProComp Single plane EFI intake with elbow, $150.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.
    351w Scat cast steel stock stroke crank $25.
    -------------------------------------------
    Windsor Sr. heads, ported, bare, fits 2.02" int. and 1.60" exh valves, $300.
    Comp Cams XE282HR cam, Hydraulic roller, 232 int, 240 exh @.050 lift, $75.
    Custom turbo cam, 221 int, 230 exh at .050" lift, .554" int .526" exh lift, Lobe seperation 116, $75
    302 or 351 timing covers, I have three, $20 each.
    302 oil pump pickups, $5 each.
    302 351w chrome valve covers, $20
    Bare 5.0 roller block, standard bore, $30
    302 shortblock .040" over, dissasembled, $50.
    1.6 aluminum roller rockers, $50.
    ---------------------------------------------
    76mm C&L mass air meter with tubes for 42#, 24#, and 19# injectors, $50.
    75mm P-Mass mass air meter, calibrated for 42# injectors, with flow sheet,
    silicon connector and clamps, $75.
    75mm Pro Products EGR throttle body spacer, $25.
    5.0 EFI fuel rail with Adjustable Fuel Pressure regulator, and gauge adapter, $50.
    1990 5.0 mustang EFI wiring $20.
    --------------------------------------------
    11" C-4 torque converter, 3000 stall, 10.5" bolt pattern, $50.
    9 1/2" C-4 torque converter, 3200 stall, billet cover, anti balloon plate, $200.
    J.W. Ultrabell blow proof SFI C-4 bellhousing, $100.
    5.0 T-5 transmission with bellhousing, $300.
    T-5 bellhousings $25.
    --------------------------------------------
    Flaming River manual steering rack, with adapter for use with power steering shaft, $150.
    Double hump transmission crossmembers, $10 each.
    Boxed stock Upper Control arms, $10.
    1987-93 Coupe quarter windows, $20.
    Maximum Motorsports Strut tower brace, $50.
    1979-86 Aluminum Front Bumper Bar, very rare, much lighter than steel, $100.
    1979-86 Steel front bumper bar. $20.
    Assorted fox mustang driveshafts, $20 each.
    ---------------------------------------------
    NEW Radiator Support, from Ford, $100
    3.73 8.8 rear end gears, $50.
    2.73 8.8 rear end gears, $30.
    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75.
    1995-04 front control arms, with poly bushings, and Steeda ball joints, $75.
    5.0 front sway bar with mounting brackets, $25.
    1979-86 center console with lid, $20.
    1979-82 taillights, one damaged, $10.
    1983-86 taillights, $25.
    1987-93 taillights, $25.
    1979 door panels, $20.
    6, 5.0 turbine factory aluminum wheels 15 x 7", four with tires, four center caps, $75.
    Hatch privacy shade, grey, $20.
    1987-1993 fuel level sender, NEW, $25.
    1987-93 gauge cluster, 140mph, $25.
    T-top glass tops, two passenger side, one driver side, $50 each.
    1979 fuel filler neck, might fit other years too, $20.
    4 fox mustang Throttle cables, assorted lengths, $20.
    Seat brackets, $20.
    5.0 rear springs, $20.
    5.0 front springs, $20.
    5.0 street/strip front springs, one coil cut, $25.
    Door moldings, 85-86, and 87-93, $20 a set.
    Interior trim, make offer.
    Exterior trim, make offer.
    Plastic inner fender liners $10.
    Cowl gauge holder, $10.
    8.8 Moser 31 spline Lincoln Mark 7/ SVO length forged axles, 5 lug, with studs, NEW in box, $150.
    8.8 Stock Lincoln Mark 7/ SVO axles, 5 lug, 28 spline, $25.
    8.8 Superior 31 spline, 5 lug, stock Fox length, with New bearing and seals, NEW axles, $200.
    5.0 engine accessory brackets,
    2.3 Garrett turbos, 60A/R comp, .63 A/R exh., $50 for the pair.

    Jess
    Last edited by FoxChassis; 04-09-2018 at 10:15 PM.
    Currently own;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    Previously owned;
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •