Close



Results 1 to 25 of 92

Threaded View

  1. #1

    Default 20 year collection of Fox Mustang stuff

    I'm selling my all fox mustang stuff. Some if the things I'd be willing to ship, other stuff pick up only. I can text pictures of things if you want. Prices are pretty low, but I will consider best offers. I'm located in Rome NY.

    460 Swap into fox mustang headers, 2" primaries.
    Motor plate. $300.
    CSI electric water pump $100.
    460 stud girdle with polylocks $25.
    ---------------------------------------------
    351w turbo kit hot side pipes, $50.
    351w shorty swap headers, $50.
    351w Ford motorsports intake, just like Victor Jr., $50.
    351w ProComp Single plane EFI intake with elbow, $150.
    351w rear sump swap Ford Motorsports oil pan and oil pickup, NEW, $75.
    351w Scat cast steel stock stroke crank $25.
    -------------------------------------------
    Windsor Sr. heads, ported, bare, fits 2.02" int. and 1.60" exh valves, $300.
    Comp Cams XE282HR cam, Hydraulic roller, 232 int, 240 exh @.050 lift, $75.
    Custom turbo cam, 221 int, 230 exh at .050" lift, .554" int .526" exh lift, Lobe seperation 116, $75
    302 or 351 timing covers, I have three, $20 each.
    302 oil pump pickups, $5 each.
    302 351w chrome valve covers, $20
    Bare 5.0 roller block, standard bore, $30
    302 shortblock .040" over, dissasembled, $50.
    1.6 aluminum roller rockers, $50.
    ---------------------------------------------
    76mm C&L mass air meter with tubes for 42#, 24#, and 19# injectors, $50.
    75mm P-Mass mass air meter, calibrated for 42# injectors, with flow sheet,
    silicon connector and clamps, $75.
    75mm Pro Products EGR throttle body spacer, $25.
    5.0 EFI fuel rail with Adjustable Fuel Pressure regulator, and gauge adapter, $50.
    1990 5.0 mustang EFI wiring $20.
    --------------------------------------------
    11" C-4 torque converter, 3000 stall, 10.5" bolt pattern, $50.
    9 1/2" C-4 torque converter, 3200 stall, billet cover, anti balloon plate, $200.
    J.W. Ultrabell blow proof SFI C-4 bellhousing, $100.
    5.0 T-5 transmission with bellhousing, $300.
    T-5 bellhousings $25.
    --------------------------------------------
    Flaming River manual steering rack, with adapter for use with power steering shaft, $150.
    Double hump transmission crossmembers, $10 each.
    Boxed stock Upper Control arms, $10.
    1987-93 Coupe quarter windows, $20.
    Maximum Motorsports Strut tower brace, $50.
    1979-86 Aluminum Front Bumper Bar, very rare, much lighter than steel, $100.
    1979-86 Steel front bumper bar. $20.
    Assorted fox mustang driveshafts, $20 each.
    ---------------------------------------------
    NEW Radiator Support, from Ford, $100
    3.73 8.8 rear end gears, $50.
    2.73 8.8 rear end gears, $30.
    31 spline Track lock 8.8 rear differential, with gear setup and rebuild stuff, $75.
    1995-04 front control arms, with poly bushings, and Steeda ball joints, $75.
    5.0 front sway bar with mounting brackets, $25.
    1979-86 center console with lid, $20.
    1979-82 taillights, one damaged, $10.
    1983-86 taillights, $25.
    1987-93 taillights, $25.
    1979 door panels, $20.
    6, 5.0 turbine factory aluminum wheels 15 x 7", four with tires, four center caps, $75.
    Hatch privacy shade, grey, $20.
    1987-1993 fuel level sender, NEW, $25.
    1987-93 gauge cluster, 140mph, $25.
    T-top glass tops, two passenger side, one driver side, $50 each.
    1979 fuel filler neck, might fit other years too, $20.
    4 fox mustang Throttle cables, assorted lengths, $20.
    Seat brackets, $20.
    5.0 rear springs, $20.
    5.0 front springs, $20.
    5.0 street/strip front springs, one coil cut, $25.
    Door moldings, 85-86, and 87-93, $20 a set.
    Interior trim, make offer.
    Exterior trim, make offer.
    Plastic inner fender liners $10.
    Cowl gauge holder, $10.
    8.8 Moser 31 spline Lincoln Mark 7/ SVO length forged axles, 5 lug, with studs, NEW in box, $150.
    8.8 Stock Lincoln Mark 7/ SVO axles, 5 lug, 28 spline, $25.
    8.8 Superior 31 spline, 5 lug, stock Fox length, with New bearing and seals, NEW axles, $200.
    5.0 engine accessory brackets,
    2.3 Garrett turbos, 60A/R comp, .63 A/R exh., $50 for the pair.

    Jess
    Last edited by FoxChassis; 04-09-2018 at 10:15 PM.
    Previously owned;
    1979 Mustang, v6 swapped to EFI 393, custom installed m122 blower, 4r70w trans, Megasquirt II, T-top swaped in.
    1990 Mustang, 545 BBF, C-4 with brake, ladder bars.
    1983 Mustang, 1984 SVO Mustang
    1984 Mustang convertible, v6 swapped to 351
    1986 Mustang GT, 1989 Mustang GT convertible
    1992 Mustang coupe, 4 swapped to 302

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •