'84 gt350 fuel sending unit replace any tricks I should know about thanks
'84 gt350 fuel sending unit replace any tricks I should know about thanks
Start with an empty tank since you will need to drop it. I made a holder out of a 2x4 and a piece of plywood. This way the floor jack did not dent the tank.
Fox Body/3rd Gen MCA Gold Card Judge
84 SVO 24K miles, 85 Mclaren Capri Vert. 84 GT Turbo Vert.
88 Mclaren Mustang Vert 20K miles, 89 Mustang LX Sport Vert,
03 Mach 1 7900 miles, 74 Mustang II, 69 Mustang, 67 Mustang, 07 GT500,
14 Mustang CS/GT, 15 F150 FTX Tuscany, 16 F250 Crewcab, 67 Tbird 47K miles
Test the sender before you install it! I ordered and installed a new tank and sender, but the sender does not read accurately. Haven't felt like doing it again so I have to live with it for now!
Sent from my Nexus 7 using Tapatalk
Any tips on HOW to test a fuel sending unit in an early fox body? I have an INOP fuel guage in my '83 and want to verify why before dropping the tank
1983 Mustang GT
1980 Fairmont Wagon
1981 Fairmont Futura
I should have done some stuff before I posted . I dropped my tank tonight and grabbed my EVTM. I used my multi meter on resistance mode (Ohms) and could not get the reading to change when I ran the sender through its range of motion with the meter leads on the terminals on the sender. Looks like it's time for a new one for me.
1983 Mustang GT
1980 Fairmont Wagon
1981 Fairmont Futura
Connect With Us