Does anyone know where I could find the short versions of the seat belt shield in gray for an 86 Convertible?
The one in the link is the longer one, which is not for a convertible
https://www.npdlink.com/store/produc...6404-2457.html
Does anyone know where I could find the short versions of the seat belt shield in gray for an 86 Convertible?
The one in the link is the longer one, which is not for a convertible
https://www.npdlink.com/store/produc...6404-2457.html
Previous:
79 Notchback
86 GT
93 GT Convertible
Current:
86 GT Convertible
Why not just trim the shield down to the correct size?
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
I can probably do that. Just wanted to see if there were any other options first
Previous:
79 Notchback
86 GT
93 GT Convertible
Current:
86 GT Convertible
Understand. Unfortunately that is the only one I am aware of for the outside seat belts up front. There is a shorter one for the console side, but it doesn't look the same. Good Luck!
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Matt, I looked for that piece for quite awhile. No one makes a reproduction. Your options are to repair your original (that's what I did as the original had a split in it), or grab one from a junkyard.
Good luck,
Tom
Connect With Us