If its 87-93 style AOD, then you'll be okay.
The transmission hump might need a little work, and the crossmember.
The TV cable on the port EFI 5.0goes to the Throttle body on the engine.
The TV rod on the AOD M code 5.0 HO goes to the Central Fuel Injection unit
If you are using a 4-bbl carb, you have to fit either a rod or cable TV to the AOD transmission
Its this geeky stuff down here that varies, here it is:-
Item A. Your AOD has to use either a TV rod or cable
And
Item B. Your AOD needs to be shifted by a shift rod or cable
Four types
Type 1 Lincoln set up v
Type 2 Panther/Fox set up v
Type 3 Variation Reversed v
Type 4 Variation v
For the TV cable or rod, two types
For the 1980 to 1985 Panthers, long wheel base Foxes and the carberettor looking 84 and 85 CFi 5.0 EFI HO GT,
it was rod TV, like the C4 and FMX's and C6's from 1968 on all over again
http://www.supermotors.net/registry/10768/33518#content
If its a Port 5.0 EFi, then you just use a cable.
Connect With Us