Stock 85 air cleaner pieces

[dagenham]

Can someone please take a few pics inside and outside of the small breather element that goes in the back of the air cleaner on an 85? I got a new filter and the hole in the air cleaner is a lot bigger than the tube on the filter. I can't compare because the old one is melted beyond recognition. Plus I need the elbow that goes on the end of the filter.

[escogt]

This clip is what holds the element housing onto the air cleaner base.

[dagenham]

I have that clip. But the hole in the air cleaner is a lot bigger than the tube on the breather element.

[quickshift]

The unit has a shoulder on it with a tab(s) that goes into the hole. Then the clip lines up with the slots in the shoulder holding it in exposing the smaller nipple. Clear as mud?

[quickshift]

Check this link for reference. You may have to scroll through the pics depending on how the page opens.

https://secure.cougarpartscatalog.com/d1az-9d695-a.html

[KevinK]

Just pull the filter media out of the new one and stick it in the old one.

[dagenham]

Just pull the filter media out of the new one and stick it in the old one.

I can't. The old one is melted almost beyond recognition. That's why I wanted a couple pics. I'm not sure if I'm missing anything. The hole in the air cleaner is a lot bigger than the nipple on the new filter. The old filter nipple is literally melted off from the fire.

[ddx77]

Not sure of these are what you’re looking for or not.










Sent from my iPhone using Tapatalk

[dagenham]

Thats what I needed. Thanks. The nipple on the filter I bought seems like it is really small in comparison to the hole in the air cleaner. But I see yours is the same so that is ok. Now I need to find the elbow that fits into the clip.

[JKengineering]

NPD sells it. I picked one up last summer.

https://www.npdlink.com/store/produc...8771-6138.html

They also list the breather elements you asked about in another post.
Mike

[JKengineering]

Double post.