Close



Results 1 to 5 of 5
  1. #1

    Default Throttle cable brackets?

    I’ve got the 351W set back in after leaking freeze plugs forced me to pull it back out. I installed a dual remote oil filter kit. I had it laying around for ever so I decided I’d use it..
    What are you guys using for throttle cable brackets. The one I have on the engine is too close to the firewall..
    I just got in a new short cable from Summit.
    This picture is with 6 cyl cable..


    Sent from my iPhone using Tapatalk

  2. #2
    FEP Member
    Join Date
    Sep 2016
    Location
    Anchorage Alaska
    Posts
    223

    Default

    Wow, that cable bracket is close. I ordered one from LOKAR for mine as I need the TV cable for the AOD I'm putting in with the 408. But as I haven't begun my swap yet I have no idea if it will work after looking at your setup.

  3. #3

    Default

    The cable shown is the stock 6 cyl cable that was way too long... it is only off 1/2" From the carb to the bracket.
    The new cable is much shorter from carb ball to mount ...I guess I should have taken a picture of the new cable.[h=ATP Accelerator Cables Y-187 from summit]1[/h]

  4. #4

    Default

    What carb are you running?
    I have a 351w in my car and I used a stock v8 fox throttle cable.
    I also have a Edelbrock RPM Airgap and 800 cfm Edelbrock carb. I had to make an adjustable adaptor plate to help align everything.
    Name:  20141109_143744.jpg
Views: 194
Size:  110.3 KB

  5. #5

    Default

    I'm running a Holley 650 DP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •