Close



Results 1 to 8 of 8
  1. #1
    FEP Member vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    455

    Default Like New Set of Raceland Coilovers with Caster/Camber Plates - 1979 to 1993

    I have a like new set of Raceland Coilovers as well as the Matching Caster/Camber plates that are required to get these coilovers mounted into a Fox Body. I have only run these for about 25 miles, and am only pulling these because I decided to install an MM Torque Arm into my car, which requires heavier rear springs, so I decided to pony-up and spend to get a full set of MM front and rear coilovers and Koni dampeners. So, these are available for sale.

    These will fit all 1979 to 1993 Fox Body Mustangs, and probably also fit Capri, Grenada, Zephyr, Fairmont, etc. (should fit any fox based platform, but check to make sure).


    Raceland has a sale on these coils for $474 right now, and the Caster/Camber plates are $139, totaling $613 shipped for this setup.


    SOLD!!!!

    Edit: 2/25/18 - Just pulled these off the car, so here is a picture of them removed.

    Name:  20180224_173723_resized.jpg
Views: 193
Size:  138.5 KB


    Here is a pic of these on my car, and they can go a good bit lower.

    Name:  FinishedBody2.jpg
Views: 334
Size:  89.8 KB

    Name:  FinishedBody.jpg
Views: 327
Size:  97.4 KB
    Last edited by vdubn; 03-01-2018 at 11:37 PM.
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

  2. #2

    Default

    Quote Originally Posted by vdubn View Post
    I have a like new set of Raceland Coilovers as well as the Matching Caster/Camber plates that are required to get these coilovers mounted into a Fox Body. I have only run these for about 25 miles, and am only pulling these because I decided to install an MM Torque Arm into my car, which requires heavier rear springs, so I decided to pony-up and spend to get a full set of MM front and rear coilovers and Koni dampeners. So, these are available for sale.

    These will fit all 1979 to 1993 Fox Body Mustangs, and probably also fit Capri, Grenada, Zephyr, Fairmont, etc. (should fit any fox based platform, but check to make sure).


    Raceland has a sale on these coils for $474 right now, and the Caster/Camber plates are $139, totaling $613 shipped for this setup.


    I am selling these for $500 shipped within the lower 48 states (shipping on these is like $60, so this is a good deal for someone looking for a good and inexpensive option for a full set of coilovers).


    Here is a pic of these on my car, and they can go a good bit lower.

    Name:  FinishedBody2.jpg
Views: 334
Size:  89.8 KB

    Name:  FinishedBody.jpg
Views: 327
Size:  97.4 KB
    What size rims and tires are you running with this setup? What is the drop

    Sent from my SM-G930V using Tapatalk
    "V/I is Futile"
    ---------------------
    1982 Capri RS 5.0
    1983 Mustang GT 5.0
    2014 Mustang GT 5.0

  3. #3
    FEP Member vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    455

    Default

    18x10 rears +25 offset (important for our Fox body's), tires are Nitto 555 - 275-35-18
    18x8.5 +25 offset, tires are Nitto 555 - 245-40-18

    Car was lowered about 2" front and rear.
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

  4. #4
    FEP Power Member Fearnot's Avatar
    Join Date
    Jan 2015
    Location
    Concord NC
    Posts
    1,491

    Default

    Are they off the car yet? Any pictures?
    88 Turbo Coupe auto
    88 Turbo Coupe 5spd
    79 Fairmont Futura 4.6
    79 Capri RS - 2.3/5spd restomod
    80 Capri 5.0/5spd project
    79 Zephyr Z7 factory 5.0 sunroof
    79 Pace Car 5.0/5spd project
    85 LTD LX factory 5spd?(not documented)
    86 GT conv 5.0/5spd
    79 Pace Car 2.3/4spd - needs new home

  5. #5
    FEP Member vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    455

    Default

    I ran out of time today, and I ordered the wrong springs from Maximum Motorsports, so the correct ones wont arrive until Tuesday. If someone is seriously interested, I would pull them off tomorrow, I just didn't want to disable the car for a few days, as I just got it running good enough to have a little fun. Trust me, they are brand new, the springs have no chips, nothing... literally just installed these.

    Here are a couple of pics of the fronts still on the car:
    Name:  20171213_185246_resized.jpg
Views: 260
Size:  43.9 KB

    Name:  20171213_185329_resized.jpg
Views: 259
Size:  26.8 KB

    Name:  20171213_185433_resized.jpg
Views: 260
Size:  45.2 KB

    Name:  20171214_220247_resized.jpg
Views: 259
Size:  128.5 KB
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

  6. #6
    FEP Power Member Fearnot's Avatar
    Join Date
    Jan 2015
    Location
    Concord NC
    Posts
    1,491

    Default

    Thanks. Maybe I can get these from you soon. Need them for my Pace Car.
    88 Turbo Coupe auto
    88 Turbo Coupe 5spd
    79 Fairmont Futura 4.6
    79 Capri RS - 2.3/5spd restomod
    80 Capri 5.0/5spd project
    79 Zephyr Z7 factory 5.0 sunroof
    79 Pace Car 5.0/5spd project
    85 LTD LX factory 5spd?(not documented)
    86 GT conv 5.0/5spd
    79 Pace Car 2.3/4spd - needs new home

  7. #7
    FEP Member vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    455

    Default

    These would work well on a Pace Car, they are a great setup
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

  8. #8
    FEP Member vdubn's Avatar
    Join Date
    May 2017
    Location
    Beaverton, Oregon
    Posts
    455

    Default

    Just posted a pic of the coilovers after pulling them from the car this weekend. Still for sale
    85 GT Hatchback, T-Tops. 2012 Coyote 5.0L Swap, T56 Magnum, GT550 Dept of Boost kit, with Eaton M122 SC, RAM 11" Powergrip clutch, BBK Long Tubes/OR X-Pipe, Flowmaster Axle Back, Stifflers DS Loop, and Rear X-member, AJE Tube Crossmember with AJE-Mod Mounts, 3.73 Posi 8.8, 5 lug Cobra 13" fr and 12.6" rear disc swap, 2004 Hydroboost Swap, MM SubFrame Connectors, MM Panhard Bar, MM front A-Arms, MM rear control arms, MM CC Plates, MM Coilovers w/Koni dampeners, MM Torque Arm (soon to be installed).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •