I have done several searches online and in the Ford manual but cant find the info I need.
I took the factory Holley off and put an Edelbrock carb on my 85. Now I'm trying to figure out the vacuum line hook up. The one vacuum line comes from the non electric ported vacuum switch at the middle fitting to a fitting on the passenger top side of the Holley. The second line comes from the bottom of the electric ported vacuum switch to the front of the Holley.
Can somebody tell me which vacuum line should at least go to the vacuum fitting on the Edelbrock? The Edelbrock manual shows one port is for emissions engines and the other side is for non emissions engines. Should i simply hook both vacuum switch ports together in a tee and run both from the single port for emissions style engines?
BTW, the dizzy vacuum line goes to the center port of the non electric ported vacuum switch.