I've been working on a kinda basement Frankenstein's monster child in my garage, it's a 2.3 Tubro out of a 88 Turbocoupe TBird that has less than 12,000 miles on it since it was built. The person that I got it from didn't have the turbo or the vacuum lines so I'm kinda trying to get this to work and having some difficulties... the motor is in a 92 5.0 shell the wiring harness is a adapted 89 wiring harness of a regular 2.3 to the tbird computer and a Moates quarterhorse and plugs on the motor. I got it to run and everything but I can't find anything on the vacuum lines diagram as to how I should have it. EGR delete, one vacuum line from the intake to the break booster, one to the breather on top of the motor( made the exhaust start to be a little bit blue - one line to the oil filter I think? ( a tube next to the alternator going down to the filter) and then I had one line that I had going to the turbo wastegate controller... I don't have a dedicated tree but I have a Y tree off of the intake and another vacuum single.... any thoughts or anything would be appreciated.
Connect With Us