Hi,
I have a puller and none of the bolts fit the wheel (84 Capri). Any idea what size and pitch?
Thanks
Chris
Hi,
I have a puller and none of the bolts fit the wheel (84 Capri). Any idea what size and pitch?
Thanks
Chris
I'm an FEP Paid Supporter and proud of it. Are you?
1984 Capri Turbo RS - Alive after 7 years! Build Thread
2018 Mustang GT - daily driver
Been wondering that myself. Good question.
67 Mustang Coupe
96 Tangerine GT
86 Saleen #179
Often you can get away without a puller. Back the nut off until it is flush with the end of the shaft. Grab the wheel and put tension on it like you are pulling it off. Then give the nut a good wack with a brass or steel hammer. Some will come off before hitting it.
Fox Body/3rd Gen MCA Gold Card Judge
84 SVO 24K miles, 85 Mclaren Capri Vert. 84 GT Turbo Vert.
88 Mclaren Mustang Vert 20K miles, 89 Mustang LX Sport Vert,
03 Mach 1 7900 miles, 74 Mustang II, 69 Mustang, 67 Mustang, 07 GT500,
14 Mustang CS/GT, 15 F150 FTX Tuscany, 16 F250 Crewcab, 67 Tbird 47K miles
^ yup, lol, done many times... knees at about 4 & 8 o-clock and one hand at 12, apply pulling tension and hit the backed off (flush with shaft) nut.
Mike
1986 Mustang convertible ---> BUILD THREAD
Past Fox-chassis "four eyes":
1983 Mercury Cougar LS
1986 Ford Thunderbird ELAN
1980 Capri RS Turbo
Work in progress website ---> http://carb-rebuilds-plus.boards.net/
I'm an FEP Paid Supporter and proud of it. Are you?
1984 Capri Turbo RS - Alive after 7 years! Build Thread
2018 Mustang GT - daily driver
This is what I used on my 86 mustang.
Then I used another bolt to push against the column instead of the puller end. Pulled end seemed too wide.
Sent from my iPhone using Tapatalk
1985 Mustang GT Hatch, Black/Grey - 351w / 5-speed / 8.8 Rear w/3.73's / A/C
__________________________________________
Past Owned Four Eyes -
1986 Mustang SVO, Black - sold 1/19
1985 Mustang GT Convertible / Black on Grey / 5spd / 27k original miles
1985 Mustang GT Hatch Canyon Red w/grey int / 5spd
1985 Mustang GT Hatch Canyon Red w/grey int / Sunroof / 5spd / 46k original miles
1985 Mustang GT Convertible White w/gray int / 5spd
5/16 24 pitch (in case the pictures go away someday)
Thanks!
I'm an FEP Paid Supporter and proud of it. Are you?
1984 Capri Turbo RS - Alive after 7 years! Build Thread
2018 Mustang GT - daily driver
Last edited by ddx77; 01-22-2018 at 10:38 AM.
1985 Mustang GT Hatch, Black/Grey - 351w / 5-speed / 8.8 Rear w/3.73's / A/C
__________________________________________
Past Owned Four Eyes -
1986 Mustang SVO, Black - sold 1/19
1985 Mustang GT Convertible / Black on Grey / 5spd / 27k original miles
1985 Mustang GT Hatch Canyon Red w/grey int / 5spd
1985 Mustang GT Hatch Canyon Red w/grey int / Sunroof / 5spd / 46k original miles
1985 Mustang GT Convertible White w/gray int / 5spd
I have had the best luck using this style of steering wheel puller.
Or this style
The Mustang bolt spacing is very narrow and the bolt end up at the inner edges of the tool, but it still works very well. That style can often be found at your local auto parts store either for purchase or tool rental.
Trey
"I Don't build it hoping for your approval! I built it because it meets mine!"
"I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."
Mustangs Past: Too many to remember!
Current Mustangs:
1969 Mach 1
1979 Pace Car now 5.0/5 speed
1982 GT Stalled RestoModification
1984 SVO Still Waiting Restoration
1986 GT Under going Wide Body Conversion Currently
Current Capris:
1981 Capri Roller
1981 Capri Black Magic Roller Basket Case
1982 Capri RS 5.0/4spd T-top Full Restoration Stalled in TX
1984 Capri RS T-top Roller
1983-84 Gloy Racing Trans Am/IMSA Body Parts
Yes, that would be the correct way to do it.
Fox Body/3rd Gen MCA Gold Card Judge
84 SVO 24K miles, 85 Mclaren Capri Vert. 84 GT Turbo Vert.
88 Mclaren Mustang Vert 20K miles, 89 Mustang LX Sport Vert,
03 Mach 1 7900 miles, 74 Mustang II, 69 Mustang, 67 Mustang, 07 GT500,
14 Mustang CS/GT, 15 F150 FTX Tuscany, 16 F250 Crewcab, 67 Tbird 47K miles
[QUOTE=wraithracing;1871133]I have had the best luck using this style of steering wheel puller.
This is the one I've used on 4 Mustangs and Celica.
Scotty
1985 Fox Notch 4-banger Ranger tube header Eastwood Royal Blue
1988 Fox LX 5.0 AOD Vert BBK 170mph speedo Candy Apple Red
1999 Mustang Coupe V6 Auto Chrome Yellow -Daily Driver.
Past Pony's.....
68 Coupe Inline-6 3-Speed-Man. Primer
78 II Hatch 302 3-Speed-Auto Sunroof Black
81 4-Eye Coupe 4-Banger 4-Speed-Man. White
Connect With Us