Close



Page 1 of 2 12 LastLast
Results 1 to 25 of 42
  1. #1

    Default 2 Aluminum front bumpers and Capri body parts

    I've had these parts been laying around my garage for many years, and it's time to sell them to someone who can make use of them

    Parts are located in Gardena, California (LA area):

    2 Aluminum bumpers- $150 each or 2 for $250

    Capri hood with large RS Dome- $200
    Capri grill insert (no damage)- $40

    Rear fascia for Mercury Capri (Late version with oval tail lights)- $150
    Front fascia for Mercury Capri (Early version)- $200
    Fascias are complete with no rips or tears.

    Oval tail lights for Mercury Capri - $50 each or both for $75

    I also have the front bumper turn signal assemblies along with a some side marker lenses and side marker trim
    Attached Images Attached Images      

  2. #2
    FEP Power Member tonysilver82's Avatar
    Join Date
    Dec 2011
    Location
    stanton,alabama
    Posts
    1,233

    Default

    Those don't look like aluminum bumpers what's the weight on each of them

  3. #3
    FEP Super Member STANGMAN116's Avatar
    Join Date
    Mar 2013
    Location
    DENVER CO, the 303
    Posts
    2,653

    Default

    Man i want the hood

  4. #4

    Default

    Quote Originally Posted by tonysilver82 View Post
    Those don't look like aluminum bumpers what's the weight on each of them
    5,215 grams

  5. #5

    Default

    Quote Originally Posted by STANGMAN116 View Post
    Man i want the hood
    I'll be in Steamboat Springs, Colorado this June. If I haven't sold it by then I'd be happy to meet you there.
    Last edited by pvdave; 01-17-2018 at 05:44 PM. Reason: typo

  6. #6
    FEP Member javdog's Avatar
    Join Date
    Jan 2015
    Location
    SoCal SouthBay
    Posts
    168

    Default

    any other parts. I am near Gardena?

  7. #7

    Default

    Quote Originally Posted by javdog View Post
    any other parts. I am near Gardena?

    Sorry no- I haven't owned a Fox body for a number of years, and this is all that is left.

  8. #8

  9. #9

    Default

    the bumpers look like the heavy steel

  10. #10
    FEP Super Member STANGMAN116's Avatar
    Join Date
    Mar 2013
    Location
    DENVER CO, the 303
    Posts
    2,653

    Default

    Quote Originally Posted by pvdave View Post
    I'll be in Steamboat Springs, Colorado this June. If I haven't sold it by then I'd be happy to meet you there.
    Great!!! Let me know if any of it is still available ill take it all

  11. #11

    Default

    Quote Originally Posted by badnightrain View Post
    the bumpers look like the heavy steel
    That's not surprising- Both the steel and aluminum bumpers were stamped from metal sheets, perform the same function, fit the same fascias, and mount to the same points.

  12. #12

    Default

    Quote Originally Posted by STANGMAN116 View Post
    Great!!! Let me know if any of it is still available ill take it all
    OK-I'll check back with you in a week or so.

  13. #13

    Default

    Quote Originally Posted by cb650 View Post
    I'll take the side marker trim. How much?
    Let me see exactly what I have- It's in a storage unit and I'll have to check later this week.

    I'll snap some pictures so you can see the exact condition.

  14. #14
    FEP Member
    Join Date
    Sep 2005
    Location
    Mtn Home Air Force Base, Idaho
    Posts
    286

    Default

    i also want that hood!
    66 7 Liter Galaxie 4 sale
    66 T-bird 4 sale
    67 GT500 clone
    68 Cougar 302 c4
    72 Pinto 2.3 turbo soon
    79 2.3 Turbo Pace Car
    83 5.0 5spd GLX vert
    83 GT 5 spd blk/blk
    84 GT Turbo vert
    84 v6 to 5.0 SROD hatch
    84 5.0 5 spd LX cpe
    86 Capri bubble butt, painted!
    86 5.0 5spd LX hatch
    89 5.0 aod LX hatch GRM $2007 entry 12.57 @ 111
    89 2.3 auto cpe w/v8 susp/brks/strng 4 sale
    90 5.0 aod the "cruck" a little bent
    86/90 GT 5spd, 90 met a phone poll
    92 5.0 5 spd LX coupe
    97 Taurus SHO, i weld cams
    www.j4jps.com

  15. #15
    FEP Senior Member cb650's Avatar
    Join Date
    May 2014
    Location
    Hudson CO
    Posts
    663

    Default

    Quote Originally Posted by pvdave View Post
    Let me see exactly what I have- It's in a storage unit and I'll have to check later this week.

    I'll snap some pictures so you can see the exact condition.
    sounds good

  16. #16
    FEP Member javdog's Avatar
    Join Date
    Jan 2015
    Location
    SoCal SouthBay
    Posts
    168

    Default

    will the hood fit an 84 GT or only Capri?

  17. #17

    Default

    Quote Originally Posted by javdog View Post
    will the hood fit an 84 GT or only Capri?
    No- The back, sides and hinge are common, but the front edge is scalloped for the Capri fascia and grill.

  18. #18
    Moderator wraithracing's Avatar
    Join Date
    Jun 2010
    Location
    Grand Junction, CO
    Posts
    11,146

    Default

    Quote Originally Posted by javdog View Post
    will the hood fit an 84 GT or only Capri?
    As stated above, definitely a different shape. Would not match the shape of the front bumper at all.
    ​Trey

    "I Don't build it hoping for your approval! I built it because it meets mine!"

    "I've spent most of my money on Mustangs, racing, and women... the rest I just wasted."

    Mustangs Past: Too many to remember!
    Current Mustangs:
    1969 Mach 1
    1979 Pace Car now 5.0/5 speed
    1982 GT Awaiting Restoration
    1984 SVO Restoration in Progress
    1986 GT Wrecked by PO, but still want to save!

    Current Capris:
    1982 Capri Roller
    1984 Capri Returned to Bubble Back Glory
    1983-84 Gloy Racing Trans Am/IMSA Body Parts
    1982 Capri RS 5.0 4spd T-tops

  19. #19
    FEP Power Member STL79Coupe's Avatar
    Join Date
    Dec 2009
    Location
    St. louis MO
    Posts
    2,269

    Default

    I think what they mean by the bumpers looking like steel is most steel bumpers had paint overspray and aluminum is usually just plain machined silver look.
    Keith formerly STLPONDS
    '79 V8 coupe in the works!
    Build thread http://vb.foureyedpride.com/showthread.php?t=89153

  20. #20

    Default

    You may be right, but I harvested both these bumpers from junkyard cars, and they are "as removed."

    Since I'm on the West coast, perhaps these cars were built in the San Jose factory and they used the red paint to indicate an aluminum bumper.

  21. #21
    FEP Power Member tonysilver82's Avatar
    Join Date
    Dec 2011
    Location
    stanton,alabama
    Posts
    1,233

    Default

    Will you ship the bumpers

  22. #22
    FEP Member 86MustangGtRob's Avatar
    Join Date
    Feb 2012
    Location
    Toronto, Ontario, Canada
    Posts
    276

    Default

    I am also interested in the aluminum bumper. Impossible to find up here in Canada.

  23. #23

    Default

    i agree I have never seen an aluminum bumper with over spray. steel yes. and they do perform and fit the same but huge difference in weight.

  24. #24

    Default

    Have cash in hand for bumper shipped to 06704..If you're not interested in shipping bumper this far what about just the grille insert ?
    Thanks so much

  25. #25

    Default

    If anyone can be of assistance here, in my profile pic, my 81 Capri there, what am I missing on the front end to mount my headlights? I have the two plastic pieces that go on each side, where the headlights sit. But there's no where to screw them into? I know I'm missing a girlie obviously. Thanks for any help

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •