Looking for the best low profile 16" electric fan .no more than 2-1/2 thick do to clearence issue.thanks
Looking for the best low profile 16" electric fan .no more than 2-1/2 thick do to clearence issue.thanks
Try looking through the spal website but if the entire fan with motor needs to be less than 2.5" thats gonna be a tall order.
If you blink at the end of the straight away you'll miss the twisties and what fun would that be!
1982 Capri RS 5.0L
Suspension Build http://vb.foureyedpride.com/showthre...tion-and-Build
1985 SVO 2A & leather. Stolen & Destroyed 2022
Motor Build http://vb.foureyedpride.com/showthread.php?t=63505
Dyno stats and exhaust install http://vb.foureyedpride.com/showthre...Dyno-d-finally
My FMIC build http://vb.foureyedpride.com/showthre...-amp-D-project
Electronic boost controller and bypass valve
http://vb.foureyedpride.com/showthre...d-Bypass-Valve
Opperation SVO Tunes http://vb.foureyedpride.com/showthre...51#post1148551
Can you fill us in on what's going on with your setup? Maybe there's another option. For instance, I have a single e-fan with no clearance issues. If I did have issues, the deepest part of the fan (motor) could be offset enough to not interfere with the water pump snout. It's an aftermarket Chevy hhr fan.
Or if clearance is tight in the center, you could do smaller dual fans.
Connect With Us