does it have to come out to change the auto shifter ? Look like it does but want to be sure before I do.
does it have to come out to change the auto shifter ? Look like it does but want to be sure before I do.
Just did mine and yes, it had to come out.
Sent from my iPhone using Tapatalk
1985 Mustang GT Hatch, Black/Grey - 351w / 5-speed / 8.8 Rear w/3.73's / A/C
__________________________________________
Past Owned Four Eyes -
1986 Mustang SVO, Black - sold 1/19
1985 Mustang GT Convertible / Black on Grey / 5spd / 27k original miles
1985 Mustang GT Hatch Canyon Red w/grey int / 5spd
1985 Mustang GT Hatch Canyon Red w/grey int / Sunroof / 5spd / 46k original miles
1985 Mustang GT Convertible White w/gray int / 5spd
YES, it does. By now I'm sure you have it done though. If not, don't worry. It comes out easy.
1981 Mustang Coupe: Rebuilt 91/306, Ported E7's, TF Spring kit, E-303 Cam, RPM Intake, Eddy 1406 Carb, FMS Dual Roller Timing set, March UD pulleys, Summit LT Headers, Summit 2-1/2" Chambered Mufflers w/ 2-1/2" FlowTech H-Pipe/ Flowtubes & 2-1/2" LMR SS Tailpipes. C4 trans with 8.8/ 2.73 Rear.
The screws are all different so keep track of them or it won't go back together correctly.
easy meaning......
remove ashtray.
remove screws at side of ashtray bezel
Unplug lighter and remove ashtray bezel.
open console lid
remove screws around e-brake bezel
pop e-brake bezel off
remove screws by ebrake
remove screws in bottom of the console towards the front.
Also one screws towards the rear
remove gear selector bezel
unplug any remaining wires such as info center, etc.
remove console and place safely in the back seat
somebody already messed up the screws. Half where missing too.
Possible to lift console over auto shifter handle with wires connected?
Can do that with a manual shift.
There is plenty of room to work in the shifter area without totally removing console.
Leave tough to access and separate clock/g display connections connected.
With a manual shift, remove trim, fasteners, and shifter stick.
Place towel on drivers seat.
Lift and move console over hand brake and shifter tower sideways, under steering wheel, onto drivers seat.
Using D seat allows more access to work area.
Connect With Us